Used Dozers and Track Type Tractors
2022 Cat D6-20XEVP
Price: $330,000
| Hours | 5573 |
| Rating | Good |
| Serial Number | HMH01071 |
| Condition | Used |
| Phone | +1 800 748 3095 |
| Contact | Bill Morgan |
| Location | Irving, TX |
| Hours | 5573 |
| Rating | Good |
| Serial Number | HMH01071 |
| Condition | Used |
| Phone | +1 800 748 3095 |
| Contact | Bill Morgan |
| Location | Irving, TX |
| Air Conditioner |
| Air Suspension Seat |
| Blade Tilt - Single Tilt |
| Blade Type - Vpat |
| Customer Value Agreement (cva) Pick What Works! 4 Year/2,000-hour (parts & Sos) Cat Cva By Cat Financial Is 1 Of 3 Choices Available At No Additional Cost. Pick 2 & Maximize Your Value. Ask Your Local Cat Dealer For Full Offer Details, Machine Eligibility, Terms And Conditions. |
| Diff Steer |
| Emissions Level |
| Engine Enclosures |
| Financing Pick What Works! 0% For 12 Months And More Low Rates Are 1 Of 3 Choices Available For Qualifying Buyers At No Additional Cost! Pick 2 & Maximize Your Value. Ask Your Local Cat Dealer For Full Offer Details, Machine |
| Hand And Foot Control |
| Lighting |
| Online Owner's Manual |
| Product Link |
| Protection Pick What Works! 12 Months/1,000-hour Equipment Protection Plan Is 1 Of 3 Choices Available At No Additional Cost! Pick 2 And Maximize Your Value. Ask Your Local Cat Dealer For Full Offer Details, Machine Eligibility, Terms And Conditions. |
| Radio - Am Fm Radio |
| Regulatory Marking |
| Regulatory Status |
| Ripper - Multi-shank |
| Rops - Enclosed |
| Special Offers Pick What Works! Choose 2 Of 3 Value Added Options Including Lower Finance Rate, Extended Protection Plan Or Cat Cva By Cat Financial At No Additional Cost. Ask Your Local Cat Dealer For Full Offer Details, Machine Eligibility, Terms And Conditions. |
| Steering Type - Joystick |
| Tier 1 Compliant |
| Tier 2 Compliant |
| Ultra Low Sulfur Diesel Fuel |
| Contact |
Name: Bill Morgan |
| Unit Number | OKL6232487 |
| Model | D6-20XEVP |
| Serial Number | HMH01071 |
| Year | 2022 |
| Hours | 5573 |
| City | Irving |
| State | TX |
| Country | US |
| Rating | Good |
| Certification | None |
| Price | $330000 |
| Cab or Canopy | Good |
| Fuel Tank | Good |
| Grab Irons | Good |
| Pre-Cleaner Bowl | Good |
| Steps / Ladder | Good |
| Current O&MM | Yes |
| Current Safety Manual | Yes |
| Air Conditioner | Good |
| Dash Console | Good |
| EMS Panel / Warnings | Good |
| Gauges | Good |
| Glass/Mirrors | Good |
| Heater | Good |
| Seat Cushion / Arm Rest | Good |
| Switches | Good |
| Windshield Wipers | Good |
| Blow By | No |
| Compression in Radiator | No |
| Fluid Levels OK? | Yes |
| Oil Leaks | No |
| Water in Oil | No |
| Air Cleaners | Good |
| Belts / Pulleys - COOLING SYSTEM | Good |
| Fan | Good |
| Hoses | Good |
| Radiator | Good |
| Water Pump | Good |
| Alternator | Good |
| Batteries / Cables | Good |
| Starter | Good |
| Wiring | Good |
| Leaks - TRANSMISSION | No |
| Transmission - Noisy | No |
| Case | Good |
| Cooler | Good |
| Seals | Good |
| Transmission - Forward Shifts | Good |
| Transmission - Reverse Shifts | Good |
| Differential Steer | Good |
| Steering Linkage | Good |
| Steering Operating Condition | Good |
| Leaks - HYDRAULICS | No |
| Angle Cylinder | Good |
| Hose Lines | Good |
| Lift Cylinders | Good |
| Tilt Cylinder | Good |
| Cutting Edge & Bits | Good |
| Face / Moldboard | Good |
| Pins | Good |
| Push Arm | Good |
| Spill Rack | Good |
| Lines / Fittings - RIPPER / GRAPPLE / WINCH | Good |
| Pins & Bushings | Good |
| Ripper Lift Cylinder | Good |
| Shanks / Get | Good |
| Track Frame - Left | Good |
| Track Frame - Right | Good |
| Carrier Rollers Front | Left: 7.76 IN Measurement, Left: 8% Worn, Right: 7.82 IN Measurement, Right: 2% Worn |
| Idlers Front | Left: .90 IN Measurement, Left: 0% Worn, Right: .90 IN Measurement, Right: 0% Worn |
| Idlers Rear | Left: 3.9 IN Measurement, Left: 0% Worn, Right: .90 IN Measurement, Right: 0% Worn |
| Links | Left: 5.13 IN Measurement, Left: 12% Worn, Right: 5.13 IN Measurement, Right: 14% Worn |
| Pins & Bushings (External) | Left: 3.56 IN Measurement, Left: 0% Worn, Right: 3.54 IN Measurement, Right: 0% Worn |
| Segments | Left: 8.87 IN Measurement, Right: 8.87 IN Measurement |
| Track Roller 1 | Left: .62 IN Measurement, Left: 5% Worn, Right: .62 IN Measurement, Right: 5% Worn |
| Track Roller 2 | Left: .62 IN Measurement, Left: 5% Worn, Right: .62 IN Measurement, Right: 5% Worn |
| Track Roller 3 | Left: guarded Measurement, Right: guarded Measurement |
| Track Roller 4 | Left: .64 IN Measurement, Left: 8% Worn, Right: .66 IN Measurement, Right: 11% Worn |
| Track Roller 5 | Left: .64 IN Measurement, Left: 8% Worn, Right: .64 IN Measurement, Right: 8% Worn |
| Track Roller 6 | Left: guarded Measurement, Right: guarded Measurement |
| Track Roller 7 | Left: .64 IN Measurement, Left: 8% Worn, Right: .64 IN Measurement, Right: 8% Worn |
| Track Roller 8 | Left: .64 IN Measurement, Left: 8% Worn, Right: .64 IN Measurement, Right: 8% Worn |
| Planetaries / Differential, Left | Good |
| Planetaries / Differential, Right | Good |
Have questions? Want to learn more? We’re happy to help and are glad to discuss the different ways Puckett Machinery Company can help you. We invite you to contact us today!
Contact Us