The Cat® 14 motor grader delivers powerful road grading with precision blade control, fuel efficiency, and smart technology. It’s ideal for haul road maintenance, site preparation, and heavy-duty grading in rugged jobsites.
| Base Power (1st Gear) – Net | 238 hp |
| Operating Weight – Typically Equipped | 57250 lb |
| Blade Width | 14 ft |
| Base Power (1st Gear) – Net | 238 hp |
| Engine Model | Cat C13 |
| Bore | 5.1 in |
| Stroke | 6.2 in |
| Speed at Rated Power | 1,850 rpm |
| Note (3) | Net power advertised is the power available at rated speed of 1,850 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. |
| Standard Capability | 122 °F |
| Note (2) | Optimized VHP Plus is standard for the 14M3. |
| Torque Rise | 41% |
| Maximum Altitude – Full Power | 13900 ft |
| Maximum Torque – VHP Plus | 1137 lb/ft |
| Emissions | Tier 4 Final/Stage V, Tier 3/Stage IIIA equivalent or Tier 2/Stage II equivalent |
| Maximum Altitude – Full Power (Tier 3) | 14349 ft |
| Maximum Altitude – Full Power (Tier 2) | 12049 ft |
| Note (1) | Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture. |
| Standard – Fan Speed – Minimum | 550 rpm |
| Note (4) | Power as declared per ISO 14396. Rated rpm 1,850. VHP+ = 228 kW (306 hp) |
| Note (5) | Cat engines equipped with a Selective Catalytic Reduction (SCR) system are required to use: Diesel Exhaust Fluid (DEF) which meets the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. |
| Standard – Fan Speed – Maximum | 1,600 rpm |
| Displacement | 763 in³ |
| Number of Cylinders | 6 |
| Operating Weight – Typically Equipped | 57250 lb |
| Gross Vehicle Weight – Base* – Total | 50980 lb |
| Gross Vehicle Weight – Base* – Front Axle | 13994 lb |
| Gross Vehicle Weight – Typically Equipped – Total | 57250 lb |
| Gross Vehicle Weight – Typically Equipped – Rear Axle | 42005 lb |
| Gross Vehicle Weight – Typically Equipped – Front Axle | 15245 lb |
| Gross Vehicle Weight – Base* – Rear Axle | 36994 lb |
| Note | *Base operating weight calculated on standard machine configuration with 20.5 R25 tires, full fuel tank operator and ROPS cab. |
| Blade Width | 14 ft |
| Arc Radius | 16.3 in |
| Throat Clearance | 4.6 in |
| Blade Width – With End Bits | 169 in |
| Blade Height – With Cutting Edge | 24.9 in |
| Blade Width – Without End Bits | 164 in |
| Blade Height – Without Cutting Edge | 23 in |
| Maximum Depth of Cut | 23.3 in |
| Circle Centershift – Left | 25.6 in |
| Maximum Lift Above Ground | 16.5 in |
| Circle Centershift – Right | 20.5 in |
| Blade Tip Range – Backward | 5° |
| Maximum Shoulder Reach Outside of Tires – Right | 78.9 in |
| Moldboard Sideshift – Right | 31.1 in |
| Moldboard Sideshift – Left | 29.1 in |
| Maximum Shoulder Reach Outside of Tires – Left | 73.6 in |
| Blade Tip Range – Forward | 40° |
| Circle – Outer Diameter | 71.7 in |
| Front Axle – Wheel Lean – Left/Right | 17.1° |
| Front Axle – Total Oscillation per Side | 32° |
| Transmission and Differential | 23.5 gal (US) |
| Diesel Exhaust Fluid Tank (Tier 4 Only) | 5.8 gal (US) |
| Hydraulic System | 33 gal (US) |
| Circle Drive | 1.8 gal (US) |
| Cooling System | 15.9 gal (US) |
| Fuel Tank | 109.9 gal (US) |
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.0 kg (4.4 lb) of refrigerant which has a CO2 equivalent of 2.860 metric tonne (2.76 ton). |
| Standard and optional equipment may vary. Consult your Cat dealer for details. |
| Joystick, power adjustable armrests |
| Air conditioner with heater |
| Centershift pin indicator |
| Coat hook |
| Cup holder |
| Display, digital speed and gear |
| Doors, left and right side with wiper |
| Gauges (analog) inside cab (includes fuel, articulation, engine coolant temp, engine rpm, and hydraulic oil temp) |
| Gauges, machine level |
| Message display |
| Joystick gear selection |
| Joystick hydraulic controls for implements, steering, transmission |
| Ladders, cab, left and right side |
| Lights, left and right side lights |
| Lights, night time cab, LED |
| Meter, hour, digital |
| Mirror, inside rearview, wide angle |
| Power port, 12V |
| Radio ready, entertainment |
| ROPS cab, sound suppressed, less than 73 dB(A) ISO 6394 (70% fan speed) |
| Seat, mechanical suspension, cloth |
| Storage compartments |
| Throttle control, electronic |
| Air cleaner, dual stage, dry-type radial seal with service indicator through messenger and dust ejector |
| Articulation, automatic Return-to-Center |
| Air-to-Air After Cooler (ATAAC) |
| Auto Diff Lock |
| Brake wear indication |
| Brakes, oil disc, four-wheel, hydraulic |
| Consistent power to ground |
| Monitoring system |
| Clutch, circle drive slip |
| Differential, lock/unlock* |
| Drain, engine oil, ecology |
| Demand fan, hydraulic |
| Engine ECO Mode |
| Ether starting aid |
| Fuel tank, ground level |
| Fuel-water separator |
| Hydraulic demand fan |
| Muffler, under hood (China Nonroad Stage III and Tier 3/Stage IIIA/Tier 2/Stage II equivalent) |
| Optimized VHP |
| Parking brake – multi disc, sealed, oil-cooled |
| Priming pump, fuel |
| Sediment drain, fuel tank |
| Three variations of the C13 engine. One meets Tier 4 Final/Stage V emission standards and is required for higher regulated countries. One meets Tier 3/Stage IIIA/China Nonroad Stage III standards, depending on emission standards of the specific country. One meets Tier 2/Stage II equivalent emission standards and is available for lesser or non-regulated countries, depending on standards of the specific country. |
| Transmission, 8F/6R, power shift, direct drive |
| Alternator, 150 ampere, sealed |
| Batteries, maintenance free, HD, 1,125 CCA |
| Breaker panel |
| Electrical system, 24V* |
| Belt, serpentine, automatic tensioner |
| Lights: reversing (LED), roof-mounted roading, stop and tail (LED) |
| Product Link |
| Starter, electric |
| Service lights, enclosure, rear, LED |
| Alarm, back up |
| Ground level engine shutdown |
| Hammer (emergency exit) |
| Horn, electric |
| Lockout, hydraulic implement for roading |
| Operator Not Present Monitoring system |
| Paint, glare reducing – top of front frame, rear enclosure and ripper cylinders |
| Seat belt, retractable 76 mm (3 in) |
| Secondary steering |
| Windows, laminated glass: Fixed front with intermittent wiper; Side and rear wipers (3) |
| Standard and optional equipment may vary. Consult your Cat dealer for details. |
| Air horn |
| Heated door |
| Mirrors high visibility |
| Mirrors, outside heated 24V |
| Mirrors, outside mounted |
| Seat, heated |
| Seat, heated/ventilated |
| Rearview camera |
| Seat belt indicator |
| Transmission, autoshift |
| Engine, compression brake |
| Cat GRADE with Cross Slope |
| Stable Blade |
| Advanced Control Joysticks |
| Auto Articulation |
| Debris guard |
| Front axle cylinder guards |
| Rear fenders |
| Sound suppression, engine enclosure and transmission |
| Transmission guard |
| Accumulators, blade lift |
| Fast fill fuel, 378.5 L/min (100 gal/min) |
| Metallic DCM wear strips |
| Light, LED, warning strobe |
| Lights, front headlights high |
| Lights, front headlights low |
| Mounting, for warning light |
| Working lights halogen |
| Working lights LED |
| Additional rearview camera and monitor |
| Machine security system key |
| Moldboard, 4.9 m (16 ft) |
| Heater, engine coolant, 120V |
| Heater, engine coolant, 240V |
| Hydraulic arrangements with additional hydraulic valves: Base +1, Base +3, Base +4, Base +5, Base +6 |
| Product Link satellite, cellular |
| Rim, 431.8 mm x 635 mm (17 in x 25 in) MP (spare) |
| Snow wing, mounting frame ready |
| Fast fill |
| 4.9 m (16 ft) blade with flat cutting edge 254 mm x 35 mm (10in x 1 3/8 in ) |
| Push block, counterweight |
| Ripper, rear |
| Tooth, ripper |
| Coolant, -51 degrees C (-60 degrees F) |
