The TL642 is precision engineered to handle any task, offering stability, maneuverability, speed and power in any application.
| Rated Load Capacity | 6500 lb |
| Maximum Lift Height | 42 ft |
| Engine Model | Cat® C3.6L |
| Rated Load Capacity | 6500 lb |
| Maximum Lift Height | 42 ft |
| Maximum Forward Reach | 30 ft |
| Top Travel Speed | 19 mile/h |
| Drawbar Pull – Loaded | 20670 lbf |
| Turning Radius – Over Tires | 12 ft |
| Frame Leveling | 10° |
| Capacity at Maximum Height | 6500 lb |
| Capacity at Maximum Reach | 700 lb |
| Engine Model | Cat® C3.6L |
| Gross Power – Basic | 73.7 hp |
| Note | Meets U.S. EPA Tier 4 Final emission standards. |
| Operating Weight | 22002 lb |
| Height | 8 ft |
| Width | 8 ft |
| Wheel Base | 11.25 ft |
| Length – Fork Face | 18.5 ft |
| Ground Clearance | 17 in |
| Turning Radius – Over Tires | 12 ft |
| Standard | 370/75-28 Duraforce Air |
| Optional (1) | 370/75-28 Duraforce Foam Fill |
| Optional (2) | 315/95-28 Telemaster Solid |
| Optional (3) | 13.00-24 16PR Air |
| Optional (4) | 13.00-24 12PR Foam |
| Optional (5) | 370/75-28 Non-Marking Air |
| Optional | 370/75-28 Non-Marking Foam |
| Fuel Tank | 38.3 gal (US) |
| Hydraulic System | 42 gal (US) |
| Boom Up | 15 s |
| Boom Down | 10.3 s |
| Tele In | 9.5 s |
| Tele Out | 16.3 s |
| Gear Pump | Single-section |
| Auxiliary Hydraulic Pressure | 3481 psi |
| Auxiliary Hydraulic Flow | 18 gpm |
| Parking Brakes | Wet disc, spring applied hydraulic release on front axle |
| Service Brakes | Inboard wet disc brakes on front and rear axles |
| Type (1) | Trunnion mounted planetary 55 degree steer axles. |
| Type (2) | High bias limited slip differential on front axle. |
| Carriages – Dual Fork Positioning | 50 in |
| Pallet Forks – Option 2 | [2] 1220 mm, 60 mm × 100 mm ([2] 48 in, 2.36 in × 4 in) |
| Pallet Forks – Option 3 | [2] 1829 mm, 60 mm × 150 mm ([2] 72 in, 2.36 in × 6 in) |
| Pallet Forks – Option 1 | [2] 1220 mm, 60 mm × 125 mm ([2] 48 in, 2.36 in × 5 in) |
| Cubing Forks | [2] 1220 mm, 50 mm × 50 mm ([2] 48 in, 2 in × 2 in) |
| Carriages – Standard Tilt | 50 in |
| Carriages – Side Shift | 50 in |
| Carriages – Swing | 100°, 1829 mm, 2948 kg Capacity, 2268 kg Swung (100°, 72 in, 6,500 lb Capacity, 5,000 lb Swung) |
| Lumber Forks – Option 1 | [2] 1525 mm, 45 mm × 180 mm ([2] 60 in, 1.75 in × 7 in) |
| Forward | 4 speed |
| Reverse | 3 speed |
| Boom angle indicator |
| Alternator, 60 amp, 12 volt |
| Battery, 12 volt, 1000 CCA |
| Horn |
| Alarm, backup |
| Canopy, ROPS/FOPS |
| Joystick, single electronic |
| Adjustable joystick wristrest |
| Low step, grab bars for easy entry |
| Seat – vinyl, suspension with Cat logo |
| Steering wheel spinner knob |
| Floor mat – heavy duty |
| Left side rear view mirror |
| Service door, cab air intake filter, fuel fill, hydraulic fill, level indicator, fuse panel and washer fill |
| Instruments – volt meter, hourmeter, engine oil pressure gauge, water temperature gauge. All gauges protected by clear acrylic cover. |
| Park Brake with indicator light |
| Steering Wheel with Cat logo |
| Cat keys and locks |
| Brakes – wet disc service |
| Engine,Cat® C3.6L (73.7 hp) |
| Thermal starting aid |
| Transmission, 4-speed forward, 3-speed reverse |
| Cat filters, hoses and couplings |
| Axles – Dana |
| Steering – 4 wheel |
| Parking brake with indicator light |
| Drive – 4 wheel |
| Chassis, frame level up to 10 degrees when operating in rough, uneven terrain |
| Cat IT Coupler |
| Coolant – Anti-freeze, 50/50 Mix |
| Tires – 370/75-28 Duraforce Air |
| Integrated lift and tie down points |
| Standard Cat color paint |
| Auxillary hydraulics for auxillary attachments (one function) |
| Hydraulic IT Coupler (includes Auxiliary Electrics) |
| Work Light Group: 2 Cab mounted headlights — 2 forward, 1 rearward; 1 Reversing Light; 2 Boom Mounted Lights, 1 Rotating Beacon |
| Engine heater block |
| Heater – open cab |
| Road Light Group — Headlights, Brake Lights, Turn Signals |
| Air conditioning |
| Auxiliary hydraulics for Hydraulic Work Tools (one function) |
| Single Joystick – with Rocker Switch |
| EROPS – Cab Enclosure (Door, Safety Glass Windows, Front Windshield Wiper, Heater & Defroster Fan) |
| Skylight Wiper |
| Brick Guard – Top and front. |
| Tires – 13.00-24 12PR Foam |
| Tires – 13.00-24 16PR Air |
| Tires – 370/75-28 Duraforce Foam Fill |
| Tires – 370/75-28 Non-Marking Air |
| Tires – 315/95-28 Telemaster Solid |
| Fenders |
| Tow Hook – Pintle Type |
| Instant Hook – 4000 lb capacity, boom head mounted winch |
| Outriggers |
| Artic package – Package includes: 2400 AMP starter, 1000 watt hydraulic reservoir heater, 500 watt engine oil-pan heater, Dual maintenance free, 1375 CCA gel cell batteries, 160 watt battery heating blanket, 1000 watt engine block heater. |
| Access Work Platform – 8 ft x 4 ft; 1,000 maximum capacity (available from factory) |
| Carriage – side shift, 50 in. (available from factory) |
| Lifting Hook – fork mounted (available from factory) |
| Truss Broom |
| Carriage – standard tilt, 50 in. (available from factory) |
| Carriage – wide tilt, 72 in. (available from factory) |
| Carriage – standard rotate, 50 in. (available from factory) |
| Carriage – swing, 72 in., 100 degrees, 6000 lb capacity, 5000 lb swung (available from factory) |
| Pallet Forks – two 60 in, 2 in x 6 in, capacity per pair 6600 lb (available from factory) |
| Pallet Forks – two 48 in, 2.36 in x 4 in, capacity per pair 6600 lb (available from factory) |
| Cubing Forks – two 48 in, 2 in x 2 in, capacity per pair 3800 lb (available from factory) |
| Bucket – General Purpose 1.3 Cu. Yd. |
| Bucket – Material Handling 1.95 Cu. Yd. |
| Bucket – Multi-Purpose, 1.3 Cu. Yd. |
