Contact Us

920 Compact Wheel Loader

920

Compact Wheel Loader

Price: Request a Quote for Pricing

The Cat® 920 Small Wheel Loader features an optimized Z-bar linkage that combines the digging efficiency of a traditional Z-bar loader with tool carrier capabilities for great performance and versatility. With parallel lift and high tilt forces throughout the working range you can safely and confidently handle loads with precise control. A new engine layout greatly improves rear visibility and service access.

Key Specs
Maximum Gross Power 121 hp
Operating Weight 21742 lb
Bucket Capacities 1.3-3.5 m3 (1.7-4.6 yd3)
Request a Quote Get Financing

Product Specifications for 920

Maximum Gross Power 121 hp
Rated Net Power – Rated Engine Speed 2200 r/min
Maximum Gross Power – Rated Engine Speed 2200 r/min
Rated Net Power – SAE J1349 120 hp
Maximum Gross Power – ISO 14396 (metric) 122 hp
Rated Net Power – ISO 9249 118 hp
Maximum Gross Torque – SAE J1995 372 ft·lbf
Maximum Gross Torque – ISO 14396 369 ft·lbf
Maximum Net Torque – SAE J1349 366 ft·lbf
Maximum Net Torque – ISO 9249 363 ft·lbf
Displacement 220 in³
Bore 3.85 in
Stroke 4.72 in
Engine Model Cat C3.6
Emissions Engine meets Tier 4 Final/Stage V emission standards.
Note Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
Maximum Gross Power – ISO 14396 121 hp
Operating Weight 21742 lb
Bucket Capacities 1.3-3.5 m3 (1.7-4.6 yd3)
Bucket Capacities – General Purpose 1.3-1.9 m³ (1.7-2.5 yd³)
Bucket Capacities – Light Material 2.5-3.5 m³ (3.3-4.6 yd³)
Recyclability 95%
Transmission 0.8 gal (US)
Engine Crankcase 2.6 gal (US)
Diesel Exhaust Fluid (DEF) Tank 4.8 gal (US)
Axles – Rear 4.5 gal (US)
Cooling System 5.7 gal (US)
Hydraulic System – Including Tank 25.9 gal (US)
Axles – Front 4.5 gal (US)
Fuel Tank 43.6 gal (US)
Hydraulic Tank 14.5 gal (US)
Note DEF used in Cat Selective Catalyst Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
ROPS ISO 3471:2008
FOPS ISO 3449:2005
Note (3) The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).
Note (2) The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).
Note (1) Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (4) *The measurements were conducted with the cab doors and windows closed.
Maximum Working Pressure – Steering Pump 3190 psi
Steering Cycle Times – Full Left to Full Right – At 2,350 rpm: 90 rpm Steering Wheel Speed 2.3 s
Steering Articulation Angle – Each Direction 40 °
Number of Steering Wheel Turns – Full Left to Full Right or Full Right to Full Left 3.4 turns
Maximum Flow – Steering Pump 21.7 gpm
Relief Pressure – Tilt Cylinder 4641 psi
Maximum Flow – Implement Pump – 3rd Function, Maximum Flow, Standard 25 gpm
Maximum Flow – Implement Pump 43.6 gpm
Relief Pressure – Tilt Cylinder – 4th Function Relief Pressure 4641 psi
Hydraulic Cycle Time – Float Down, Maximum Lift to Ground Level 2.7 s
Note All cycle times listed are with cylinder snubbing turned off.
Maximum Working Pressure – Implement Pump 4061 psi
Hydraulic Cycle Time – Total Cycle Time 11.5 s
Hydraulic Cycle Time – Rackback 2.2 s
Maximum Flow – Implement Pump – 4rd Function, Maximum Flow 25 gpm
Hydraulic Cycle Time – Dump, at Maximum Reach 1.8 s
Hydraulic Cycle Time – Raise, Ground Level to Maximum Lift 4.8 s
Maximum Flow – Implement Pump – 3rd Function, Maximum Flow, High 40 gpm
Note *Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.
Forward and Reverse – Speed Range 3 25 mile/h
Forward and Reverse – Speed Range 2* 12.5 mile/h
Forward and Reverse – Speed Range 1* 6.3 mile/h
Rear Oscillating ±11 degrees; Locking differential (standard)
Front Fixed; Locking differential (standard)
Other Choices Include 17.5 R25 L3 XHA2; 20.5 R25 L3 XHA3; 17.5-25 L2/L3 SGL; 20.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow; 20.5 R25 L2 Snow; 17.5 R25 Solid
Standard Size 17.5 R25 L2 XTLA
Note (1) Other tire choices are available. Contact your Cat dealer for details.
Note (3) Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Note (2) In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.