Contact Us

6015 Hydraulic Shovel

6015

Hydraulic Shovel

Price: Request a Quote for Pricing

The next generation Cat® 6015 Hydraulic Shovel lets you move more material at a low cost, so you can achieve production targets, deliver on your commitments, meet deadlines and maximize your profitability. With high tool carrying capacity, increased durability and the most powerful engine in its class, the Cat 6015 generates higher productivity and fuel efficiency than other shovels. And it’s offered with more and better options that let you match your machine to your operation — from access and cold weather packages to multiple stick and track pad options. In addition, a large range of buckets is available, giving you optimum payload and machine efficiency for your operation. And the 6015’s high tool carrying capacity gives you the ability to employ large buckets and move more in fewer cycles.

Key Specs
Engine Output – SAE J1995 824 hp
Bucket Payload 16.1 ton (US)
Operating Weight 154.3 ton (US)
Request a Quote Get Financing

Product Specifications for 6015

Engine Output – SAE J1995 824 hp
Bucket Payload 16.1 ton (US)
Operating Weight 154.3 ton (US)
Note Specifications shown above apply to highly regulated, backhoe configuration. Lesser regulated and frontless configurations are also available.
Engine Model Cat® C27
Gross Power – SAE J1995 824 hp
Net Power – SAE J1349 812 hp
Number of Cylinders 12
Bore 5.4 in
Stroke 6 in
Displacement 1648 in³
Engine Model Cat® C27
Gross Power – SAE J1995 839 hp
Net Power – SAE J1349 829 hp
Number of Cylinders 12
Bore 5.4 in
Stroke 6 in
Displacement 1648 in³
Aspiration Turbocharged and air-to-air aftercooled
Operating Weight 154 ton (US)
Ground Pressure 23.6 psi
Note Operating weight includes: 700 mm (28 in) track pads, 7.6 m (24 ft 11 in) boom, 3.4 m (11 ft 2 in) stick, standard rock bucket, 100% fuel and lubricants
Operating Weight 308000 lb
Standard 28 in
Wide 35 in
Extra Wide 39 in
Number of Shoes – Each Side 46
Number of Track Rollers – Each Side 9
Number of Carrier Rollers – Each Side 3
Track Pads Heavy Duty (HD) with double grouser
Travel Speed – Two Stages – 1st Stage – Maximum 1.6 mile/h
Travel Speed – Two Stages – 2nd Stage – Maximum 2.3 mile/h
Maximum Drawbar Pull – Forward 192886 lbf
Maximum Drawbar Pull – Reverse 220987 lbf
Gradeability – Travel Drives Approximately 42%
Hydraulic Track Tensioning With accumulator
Maximum Drawbar Pull 179847 lbf
Fuel Tank 449 gal (US)
Cooling System 44 gal (US)
Engine Oil 23 gal (US)
Swing Drive 2.4 gal (US)
Hydraulic System – Including Tank 463 gal (US)
Hydraulic Tank 253 gal (US)
Grease Tank 57 gal (US)
System Voltage 24 V
Batteries 4 × 200 Ah (12 V each)
Alternator Rating 150 A (24 V) in total
Components (1) Emergency stop switches: one in cab, three in engine module, one pull rope accessible from ground level
Components (2) Four maintenance free batteries
Components (3) Lockable battery isolation switch
Components (5) 14 LED high-brightness working lights
Components (4) 5 LED service lights
Components (6) 2 electric horns
Components (7) Two (2) lights for rear end
Components (9) One (1) beacon light on cabin roof
Components (8) One (1) light for machine deck/service
Main Pumps 3 × variable swash plate pumps
Main Pumps – Maximum Total Oil Flow 407 gpm
Main Pumps – Maximum Pressure – Attachment 4641 psi
Pilot Pump – Maximum Flow, Pilot 40.4 gpm
Pilot Pump 1 × gear pump
Pilot Pump – Maximum Pressure, Pilot 1378 psi
Main Pumps – Maximum Pressure – Travel 4641 psi
Engine Fan Pump – Maximum Flow, Engine Fan 53.1 gpm
Engine Fan Pump – Maximum Pressure, Engine Fan 3191 psi
Swing Pump 1 × variable swash plate pump
Engine Fan Pump 1 × variable swash plate pump
Swing Pump – Maximum Flow – Swing 127 gpm
Hydraulic Fan Pump – Maximum Pressure, Hydraulic Fan 1958 psi
Hydraulic Fan Pump – Maximum Flow, Hydraulic Fan 22.7 gpm
Hydraulic Fan Pump 1 × variable swash plate pump
Swing Pump – Maximum Pressure – Swing 5294 psi
Hydraulic Oil Cooling – Maximum Flow 284 gpm
Hydraulic Oil Cooling – Diameter of Fan 46 in
Filters (1) Full-flow high-pressure filters (200 μm) for main pumps
Filters (2) Full-flow filters (20 μm), return circuit
Filters (3) Pressure filters (16 μm), servo circuit
Filters (4) Full-flow filters (6 μm), cooling return circuit
Filters (5) Swing charge filter (15 μm)
Filters (6) Pump case return screens (125 μm)
Swing Drive Two (2) compact planetary transmissions with axial piston motors
Parking Brake Wet multiple disc brake, spring-loaded/hydraulically released
Maximum Swing Speed 4.9 r/min
Swing Ring Triple-race roller bearing with sealed internal greasing
Features (1) Closed-loop with torque control
Features (2) Hydraulic braking of swing motion when control is returned to neutral position or by counteracting control for stronger braking
Features (3) All raceways and the internal gearing of swing ring supplied by automatic central lubrication system
Emissions U.S. EPA Tier 4 Final and EU Stage V; China Nonroad Stage III, equivalent to U.S. EPA Tier 2; Equivalent to U.S. EPA Tier 1
Feature Accessible from ground level for diesel fuel and grease
Equipped With (1) One pull rope emergency stop
Equipped With (2) Quick couplings for: diesel fuel and grease
Travel Speed – Two Stages – 1st Stage – Maximum 1.6 mile/h
Travel Speed – Two Stages – 2nd Stage – Maximum 2.3 mile/h
Maximum Tractive Force 197157 lbf
Maximum Drawbar Pull – Reverse 220987 lbf
Gradeability – Travel Drives 38°/78% (SAE J1309)
Number of Shoes – Each Side 46
Hydraulic Track Tensioning With accumulator
Number of Track Rollers – Each Side 9
Number of Carrier Rollers – Each Side 3
Components (1) Heavy Duty (HD) with double-grouser track pads
Components (2) Chain links connected by hardened pins and bushings
Components (3) Postive Pin Retention (PPR2) sealed and greased track design
Components (4) Hardened running surfaces of sprockets, idlers, rollers and track chain links
Components (5) Fully hydraulic self-adjusting track tensioning system with accumulator
Components (6) Automatic hydraulic retarder valve
Components (7) Acoustic travel alarm (forward and reverse)
Components (1) Pressurized cab with positive filtration
Components (2) Heated cab mirror
Components (3) Sliding upper door window
Components (4) Glass-breaking safety hammer
Components (5) Removeable lower windshield within cab storage
Components (6) Joystick Controls Alternate Patterns including ISO/JIS, BHL, MHI, KOBE, or SCM
Components (7) Beverage holder
Components (8) Literature holder
Components (9) AM/FM radio
Components (10) FM/AM radio with MP3 auxiliary port
Components (11) Two stereo speakers
Components (12) Storage shelf suitable for lunch or toolbox
Components (13) Color LCD display with service parameters, event and diagnostic annunciation, preventative maintenance, trip total, lifetime totals. Gauges for engine speed, engine oil pressue, and hydraulic oil temperature
Components (14) Head and arm rests
Components (15) Independently adjustable seat consoles with integrated joysticks
Components (16) Neutral lever (lock out) for all controls
Components (17) Travel control pedals with removable hand levers
Components (18) Two power outlets, 10 amp (total)
Components (19) Laminated front upper window and tempered glass other windows
Capacity – Grease Barrel 18 gal (US)
Type (1) Central bank lubrication system
Type (2) Grease is automatically applied to all attachment pivot points, slew bearing, and bucket linkage
Type (3) Standard grease reel on machine for bucket linkage
Type (4) Grease refill service point accessible from ground
Type (1) Boom and stick torsion-resistant with welded box design
Type (2) High-tensile steel with solid steel castings at pivot areas
Type (3) Boom and stick stress-relieved after welding
Type (4) Float valve for boom down function
Buckets Equipped With – Special liner material covering main wear areas inside and outside – Lip shrouds – Wing shrouds – Heel shrouds
Maximum Digging Depth 26.3 ft
Maximum Digging Reach 45.6 ft
Maximum Digging Height 41.9 ft
Maximum Dump Height 27.9 ft
Bucket Digging Force – SAE 112600 lbf
Bucket Digging Force – ISO 120947 lbf
Stick Digging Force – ISO 104761 lbf
Stick Digging Force – SAE 98800 lbf
Capacity 1:1 10.6 yd³
Total Width 8.8 ft
Number of Teeth 5
Tooth System Cat C70 or M75
Weight – Including Standard Wear Package 18521 lb
Maximum Material Density – Loose 3030 lb/yd³
Cat C27 Engine
Aftertreatment system (used in Tier 4 Final only): – Diesel Oxidation Catalyst (DOC) – NOx Reduction System (NRS) – Non-Diesel Exhaust Fluid (DEF) solution
Air-to-Air After Cooling (ATAAC)
Turbocharger
Hydraulically driven radiator fan
Electronically controlled fan speed
Micro processed engine management
Heavy-duty air filters
Two stage fuel filtration with water separator
Starting aid — automatic ether
Exhaust system heat shields
Dual 24 V electric starters
Automatic engine idle shut down
Automatic fuel priming
Power Management System with integrated controls: – Flow-on-demand management of implement/travel (3) and swing (1) pumps – Load Enhanced Anticipatory Control (LEAC) to prevent engine lug – Proportional Priority Pressure Compensating (PPPC) technology prioritizes pump flow and pressure to individual functions (boom, stick, and bucket) during simultaneous operations
Pressure cut-off for main pumps
Cat Hydraulic Hose assemblies
Cooling of pump transmission gear oil
Closed loop swing circuit
Parking brake enabled switch
Anti drift swing logic
Pressure testing points
Full-flow high-pressure filters (200 μm), main pumps
Full-flow filters (20 μm), return circuit
Full-flow filters (6 μm), cooling return circuit
Pressure filters (6 μm), servo circuit
Swing charge filters (15 μm)
Pump case return screens (125 μm)
Boom float valves and regeneration circuit
Four maintenance-free batteries
Lockable battery isolator switch
14 LED high-brightness working flood lights
5 LED service lights
Two electric horns
Positive Pin Retention (PPR2) sealed and greased track design
Heavy Duty (HD) tracks with cast double-grouser track pads
HD fixed axle rollers
HD fixed axle idlers
HD undercarriage protection: – Propel motor guard – Propel tube guards – Slew bearing lube line protection
Automatic hydraulic retarder valve
Acoustic travel alarm (forward and reverse)
Travel motor covers with service doors
Hardened running surfaces of sprockets, idlers, rollers and track chain links
Fully hydraulic self-adjusting track tensioning system with accumulator
Grease container, 215 L (57 gal) capacity
Grease is automatically applied to all attachment pivot points, slew bearing and bucket linkage
Single HVAC system
Pressurized cab with positive filtration
Travel control pedals with removable hand levers
Pneumatically cushioned and multi adjustable comfort seat with: – Seat heating – Lumbar support – Two-point safety belt – Head and arm rests
Sliding upper door window
Removable lower windshield within cab storage
Independently adjustable seat consoles with integrated joysticks
Neutral lever (lock out) for all controls
Two power outlets, 10 amp total
Electronic-Hydraulic Servo Control
Joystick controls alternate patterns (ISO/JIS, BHL, MHI, KOBE, or SCM)
FM/AM radio with MP3 auxiliary port
Sliding side window
Wiper/washer for lower and upper windshield
Roller blind at windshield
Color LCD 178 mm (7") touchscreen display includes: – Service parameters for engine, hydraulics, and lubrication – Event and diagnostic annunciation – Gauges for engine speed, engine oil pressure, hydraulic oil temperature – Preventative maintenance – Trip total – Lifetime totals
Fixed access ladder
Heated cab mirror
Document Storage
Boom 7.6 m (24 ft 11 in)
Boom and stick thermally stress relieved after welding
Bucket wear package
Cat Product Link™ Elite (Cellular)
Cat MineStar™ Solutions Ready
Engine oil exchange interval — 500 hours
Hydraulic oil change interval – 5,000 hours
Scheduled Oil Sampling (S·O·SSM) ports
Pilot pressure monitoring via Electronic Technician (ET)
Centralized service area accessible from ground level for – Diesel fuel – Grease
Cat battery charging connector
Indicator light for grease
Standard lubricant
Jump start receptacle
Emergency stop switches; one in cab, three in engine module, one pull rope accessible from ground level
Operator Protective Guard (Top Guard)
Laminated front upper window and tempered glass other windows
Glass-breaking safety hammer
ISO or ANSI decals
Aluminum cooling package
Mesabi cooling package
700 mm (2 ft 4 in) wide track pads
900 mm (3 ft 0 in) wide track pads
1000 mm (3 ft 3 in) wide track pads
Belly plate for additional undercarriage protection
Track guards – full
Track guards – center
HD undercarriage protection: – Propel gearcase cover guard
Powered 45° access stairway
Camera monitoring system VISION 360 (four cameras and additional color display)
Stick 3.4 m (11 ft 2 in)
Stick 4.1 m (13 ft 5 in)
Frontless base machine (no boom, no stick, no linkage)
Cat Product Link Elite (Satellite)
Cat Product Link Elite (No radio)
Cold Weather Package (120 V): Engine coolant heater – external power source required, 60 Hz
Cold Weather Package (240 V): Engine coolant heater – External power source required, 50 Hz
Cat Bio HYDO™ Advanced hydraulic fluid
High temperature lubricant
Low temperature lubricant
Operator Protective Guard (front guard)
Additional buckets available, based on application, through your local Cat dealer