| Rated Gross Power - SAE J1995 | 170 hp |
| Engine Model | Cat C7.1* |
| Performance Mode | Automatic |
| Rated Gross Power - Rated Engine Speed | 1800 r/min |
| Rated Gross Power - SAE J1995 (DIN) | 172 mhp |
| Rated Engine Power - ISO 14396 | 168 hp |
| Rated Engine Power - ISO 14396 (DIN) | 170 mhp |
| Rated Net Power - SAE J1349 at Minimum Fan Speed | 165 hp |
| Rated Net Power - ISO 9249 at Minimum Fan Speed | 165 hp |
| Rated Net Power - ISO 9249 (DIN) at Minimum Fan Speed | 167 mhp |
| Maximum Gross Torque - Engine Speed | 1400 r/min |
| Maximum Gross Torque - SAE J1995 | 608 ft·lbf |
| Maximum Gross Torque - ISO 14396 | 601 ft·lbf |
| Maximum Net Torque - SAE J1349 | 593 ft·lbf |
| Maximum Net Torque - ISO 9249 | 595 ft·lbf |
| Displacement | 427 in³ |
| Bore | 4 in |
| Stroke | 5 in |
| Note | *Meets U.S EPA Tier 4 Final, EU Stage V off-highway, and Japan 2014 emission standards. |
| Note (1) | Advertised power is tested per the specified standard in effect at the time of manufacture |
| Note (2) | Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when engine is equipped with alternator, air cleaner, emission components and fan at specified speed. |
| Note (3) | No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems. |
| Operating Weight | 31124 lb |
| Operating Weight - High Lift | 31633 lb |
| Bucket Capacities | 1.9-5.0 m3 (2.5-6.5 yd3) |
| Maximum Flow - Implement Pump | 50 gpm |
| Maximum Flow - Implement Pump - 3rd Function Maximum Flow* | 50 gpm |
| Maximum Flow - Implement Pump - 4th Function Maximum Flow* | 42 gpm |
| Maximum Working Pressure - Implement Pump | 3771 psi |
| Relief Pressure - Tilt Cylinder | 4061 psi |
| Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure | 3771 psi |
| Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure | 4061 psi |
| Lift Cylinder: Standard Lift Linkage - Bore Diameter | 4.7 in |
| Lift Cylinder: Standard Lift Linkage - Rod Diameter | 2.6 in |
| Lift Cylinder: Standard Lift Linkage - Stroke | 28.7 in |
| Tilt Cylinder: Standard Lift Linkage - Bore Diameter | 5.9 in |
| Tilt Cylinder: Standard Lift Linkage - Rod Diameter | 3.5 in |
| Tilt Cylinder: Standard Lift Linkage - Stroke | 21.9 in |
| Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift | 5.1 s |
| Hydraulic Cycle Time - Dump (at Maximum Lift Height) | 1.5 s |
| Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level | 2.7 s |
| Hydraulic Cycle Time - Total Cycle Time | 9.3 s |
| Note | *3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display when equipped. |
| Fuel Tank | 51.5 gal (US) |
| Cooling System | 7.9 gal (US) |
| Engine Crankcase | 5.3 gal (US) |
| Transmission - Gear Box | 2.2 gal (US) |
| Front Axles | 6.9 gal (US) |
| Rear Axles | 6.6 gal (US) |
| Hydraulic System - Including Tank | 43.6 gal (US) |
| Hydraulic Tank | 23.8 gal (US) |
| Diesel Exhaust Fluid (DEF) Tank | 5 gal (US) |
| Note | DEF used in Cat systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1:2019. |
| Forward and Reverse - Range 1* | 1-13 km/h (0.6-8 mph) |
| Forward and Reverse - Range 2 | 8 mile/h |
| Forward and Reverse - Range 3 | 17 mile/h |
| Forward and Reverse - Range 4 | 25 mile/h |
| Note | *Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph). |
| Standard Size | 20.5 R25, radial (L-3) |
| Other Choices Include | 20.5 R25, radial (L-2), 20.5 R25, radial (L-5), 20.5-25 12PR (L-2), 20.5-25 12PR (L-3), 20.5-25 16PR (L-5), 17.5 R25, radial (L-2), 17.5 R25, radial (L-3), 17.5 R25, radial (L-5), 550/65 R25 radial (L-3), Skidder/Agriculture |
| Note (1) | Other tire choices are available. Contact your Cat dealer for details. |
| Note (2) | In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities. |
| Note (3) | Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model. |
| ROPS | ISO 3471:2008 |
| FOPS | ISO 3449:2005 LEVEL II |
| Front | Fixed; Locking differential (standard) |
| Rear | Oscillating ± 11 degrees; Open differential (standard); Limited slip differential (optional) |
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent of 2.717 metric tonnes (2.99 tons). |
| Operator Sound Pressure (ISO 6396:2008) | 68 dB(A) |
| Average Exterior Sound Pressure (ISO 6395:2008) | 101 dB(A) |
| Note (1) | European Union Directive 2000/14/EC and UK Noise Regulation 2001 No. 1701. |
| Recyclability | 95% |
| Height - Ground to Cab** | 10.92 ft |
| Height - Ground to Beacon** | 12.17 ft |
| Height - Ground to Axle Center** | 2.25 ft |
| Height - Ground Clearance** | 1.33 ft |
| Length - Overall* | 24.67 ft |
| Length - Rear Axle to Bumper | 6.5 ft |
| Length - Hitch to Front Axle | 4.92 ft |
| Length - Wheel Base | 9.83 ft |
| Clearance - Bucket at 45°* | 9.25 ft |
| Clearance - Load over Height** | 10.9 ft |
| Clearance - Level Bucket** | 11.75 ft |
| Height - Bucket Pin** | 12.83 ft |
| Height - Overall** | 16.9 ft |
| Reach - Bucket at 45°* | 3.5 ft |
| Carry Height - Bucket Pin | 1.25 ft |
| Dig Depth** | 3.9 in |
| Width - Bucket | 8.33 ft |
| Width - Tread Center | 6.33 ft |
| Turning Radius - Over Bucket | 19.5 ft |
| Width - Over Tires | 8.33 ft |
| Turning Radius - Outside of Tires | 17.75 ft |
| Turning Radius - Inside of Tires | 9.33 ft |
| Rack Angle at Full Lift | 54 ° |
| Dump Angle at Full Lift | 49 ° |
| Rack Angle at Carry | 43 ° |
| Departure Angle | 33 ° |
| Articulation Angle | 40 ° |
| Operating Weight | 31124 lb |
| Note (1) | *Vary with bucket. |
| Note (2) | **Vary with tire. |
| Note (3) | Dimensions listed are for a machine configured with 2.1 m³ (2.7 yd³) general purpose Fusion™ bucket, bolt-on cutting edge, standard counterweights, additional guarding, 80 kg (176 Ib) operator and 20.5 R25 (L-3) XHA2 tires. |
| Height - Ground to Cab** | 10.92 ft |
| Height - Ground to Beacon** | 12.17 ft |
| Height - Ground to Axle Center** | 2.25 ft |
| Height - Ground Clearance** | 1.33 ft |
| Length - Overall* | 27.3 ft |
| Length - Rear Axle to Bumper | 6.5 ft |
| Length - Hitch to Front Axle | 4.92 ft |
| Length - Wheel Base | 9.83 ft |
| Clearance - Bucket at 45°* | 11.25 ft |
| Clearance - Load over Height** | 11.58 ft |
| Clearance - Level Bucket** | 13.67 ft |
| Height - Bucket Pin** | 14.75 ft |
| Height - Overall** | 18.83 ft |
| Reach - Bucket at 45°* | 4.58 ft |
| Carry Height - Bucket Pin | 2.08 ft |
| Dig Depth** | 5.3 in |
| Width - Bucket | 8.33 ft |
| Width - Tread Center | 6.33 ft |
| Turning Radius - Over Bucket | 20.75 ft |
| Width - Over Tires | 8.33 ft |
| Turning Radius - Outside of Tires | 17.75 ft |
| Turning Radius - Inside of Tires | 9.33 ft |
| Rack Angle at Full Lift | 53 ° |
| Dump Angle at Full Lift | 48 ° |
| Rack Angle at Carry | 49 ° |
| Departure Angle | 33 ° |
| Articulation Angle | 40 ° |
| Operating Weight | 31633 lb |
| Note (1) | *Vary with bucket. |
| Note (2) | **Vary with tire. |
| Note (3) | Dimensions listed are for a machine configured with 2.1 m³ (2.7 yd³) general purpose Fusion™ bucket, bolt-on cutting edge, standard counterweights, additional guarding, 80 kg (176 Ib) operator and 20.5 R25 (L-3) XHA2 tires. |
| Steering Cylinder - Bore Diameter | 2.8 in |
| Steering Cylinder - Rod Diameter | 1.6 in |
| Steering Cylinder - Stroke | 17.2 in |
| Maximum Flow - Steering Pump | 34 gpm |
| Maximum Working Pressure - Steering Pump | 3500 psi |
| Steering Cycle Times (Full Left to Full Right) - Minimum RPM: Pump Flow Limited | 2.8 s |
| Steering Cycle Times (Full Left to Full Right) - Maximum RPM: 90 RPM Steering Wheel Speed | 2.4 s |