| Engine Power – 1,700 rpm ISO 14396:2002 |
420 hp |
| Engine Power – 1,700 rpm ISO 14396:2002 |
426 hp (metric) |
| Engine Model |
Cat® C13 |
| Gross Power – 1,700 rpm SAE J1995:2014 |
425 hp |
| Gross Power – 1,700 rpm SAE J1995:2014 |
431 hp (metric) |
| Net Power – 1,700 rpm ISO 9249:2007, SAE J1349:2011 |
393 hp |
| Net Power – 1,700 rpm ISO 9249:2007, SAE J1349:2011 |
398 hp (metric) |
| Engine Torque – 1,200 rpm ISO 14396:2002 |
1612 lbf·ft |
| Gross Torque – 1,200 rpm SAE J1995:2014 |
1627 lbf·ft |
| Net Torque – 1,100 rpm ISO 9249:2007, SAE J1349:2011 |
1539 lbf·ft |
| Displacement |
763 in³ |
| Emissions |
Meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, China Nonroad Stage IV and Japan 2014 emission standards. |
| Biodiesel Capability |
Up to B20¹ |
| Note (1) |
The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment. |
| Note (2) |
¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) and are compatible* with ULSD blended with the following lower-carbon intensity fuels**up to:
20% biodiesel FAME (fatty acid methyl ester)
***100% |
| Displacement |
12.5 L |
| Engine Power @ 1,700 rpm – ISO 14396:2002 |
429 hp |
| Engine Torque @ 1,200 rpm – ISO 14396:2002 |
1612 lb/ft |
| Net Torque @ 1,100 rpm – ISO 9249:2007, SAE J1349:2011 |
1539 lb/ft |
| Note (3) |
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (h |
| Gross Torque @ 1,200 rpm – SAE J1995:2014 |
1627 lb/ft |
| Gross Power @ 1,700 rpm – SAE J1995:2014 |
425 hp |
