Used Dozers and Track Type Tractors
2018 Cat D6T LGP VPAT
Price: $300,000
| Hours | 6144 |
| Rating | Good |
| Serial Number | MH700654 |
| Condition | Used |
| Phone | +1 800 748 3095 |
| Contact | Bill Morgan |
| Location | Fort St. John, BC |
| Hours | 6144 |
| Rating | Good |
| Serial Number | MH700654 |
| Condition | Used |
| Phone | +1 800 748 3095 |
| Contact | Bill Morgan |
| Location | Fort St. John, BC |
| Air Conditioner |
| Air Suspension Seat |
| Auxiliary Hydraulics Pressure - High Pressure |
| Blade Tilt - Dual Tilt |
| Blade Type - Angle |
| Combined Hydraulics - Two Way |
| Cross-border Transactions Must Be Conducted Through A Dealer Located In The Jurisdiction Where The Asset Is Physically Held Pre-sale. Pricing Does Not Include Additional Fees Associated With Cross-border Transactions. Any Such Fees Required To Comp |
| Diff Steer |
| Emissions Level |
| Engine Enclosures |
| Lighting |
| Mirrors |
| Pressure, Low Ground (lgp) |
| Product Link |
| Radio - Am Fm Radio |
| Rig Saver |
| Steering Type - Joystick |
| Tier 2 Compliant |
| Ultra Low Sulfur Diesel Fuel |
| Contact |
Name: Bill Morgan |
| Unit Number | OKL9174983 |
| Model | D6T LGP VPAT |
| Serial Number | MH700654 |
| Year | 2018 |
| Hours | 6144 |
| City | Fort St. John |
| State | BC |
| Country | CA |
| Rating | Good |
| Certification | None |
| Price | $300000 |
| Machine Starts and is Operable | Yes |
| Body | Good |
| Frame | Good |
| General | Good |
| Cleaning Required | Yes |
| Bumper | Good |
| Cab or Canopy | Good |
| Counterweight | Good |
| Decals | Good |
| Draw Bar | Good |
| Fenders | Good |
| Fuel Tank | Good |
| Grab Irons | Good |
| Hood | Good |
| Main Frame Welds | Good |
| Paint | Fair |
| Pre-Cleaner Bowl | Good |
| Sheet Metal | Good |
| Steps / Ladder | Good |
| ROPS Certification Plate | No |
| Safety Decals In Place | Yes |
| Safety Decals Legible | Yes |
| Back Up Alarm | Good |
| Fire Extinguisher | Good |
| Horn | Good |
| Rig Saver | Good |
| ROPS | Good |
| Secondary Exit | Good |
| Current O&MM | Yes |
| Current Parts Manual | No |
| Current Safety Manual | No |
| Air Conditioner | Good |
| Dash Console | Good |
| Gauges | Good |
| Interior Lights | Good |
| Switches | Good |
| Windshield Wipers | Good |
| Apparent Other Engine Damage | No |
| Blow By | No |
| Fuel Leaks | No |
| Knocking | No |
| Water in Oil | No |
| Belts / Pulleys - ENGINE | Good |
| Fuel Injection System | Good |
| Governor | Good |
| Operating Condition - ENGINE | Good |
| Turbocharger / Blower | Good |
| Compression in Radiator | No |
| Folded Core Radiator | Yes |
| Modular Radiator | No |
| Standard Radiator | Yes |
| Belts / Pulleys - COOLING SYSTEM | Good |
| Coolers | Good |
| Fan | Good |
| Radiator | Good |
| Water Pump | Good |
| Block Heater | Yes |
| Ether Aid | Yes |
| Alternator | Good |
| Batteries / Cables | Good |
| Pre-Heater | Good |
| Starter | Good |
| Wiring | Fair |
| Leaks - TRANSMISSION | Yes |
| Transmission - Noisy | No |
| Case | Good |
| Controls - TRANSMISSION | Good |
| Cooler | Good |
| Lines / Fittings - TRANSMISSION | Good |
| Operating Condition - TRANSMISSION | Good |
| Pump - TRANSMISSION | Good |
| Seals | Good |
| Temp / Pressure Gauges | Good |
| Transmission - Forward Shifts | Good |
| Transmission - Reverse Shifts | Good |
| Differential Steer | Good |
| Differential Steering Controls | Good |
| Steering Clutch | Good |
| Steering Linkage | Good |
| Steering Operating Condition | Good |
| Leaks - HYDRAULICS | Yes |
| Angle Cylinder | Good |
| Control Linkage - HYDRAULICS | Good |
| Hose Lines | Good |
| Lift Cylinders | Good |
| Overall Operating Condition | Good |
| Tilt Cylinder | Good |
| Cutting Edge & Bits | Good |
| Face / Moldboard | Good |
| Knuckle | Good |
| Pins | Good |
| Push Arm | Good |
| Single Tree | Good |
| Spill Rack | Good |
| Tilt Arms | Good |
| Tower | Good |
| Trunnions | Good |
| Hydraulic Winch | No |
| Mechanical Winch | No |
| Beam / Frame | Good |
| Brackets / Studs | Good |
| Brakes / Gears | Good |
| Drum / Clevis | Good |
| Freespool | Good |
| Lines / Fittings - RIPPER / GRAPPLE / WINCH | Good |
| Operates Forward | Good |
| Operates Reverse | Good |
| Pins & Bushings | Good |
| Ripper Lift Cylinder | Good |
| Ripper Tilt Cylinder | Good |
| Seals / Case | Good |
| Shanks / Get | Good |
| Track Frame - Left | Good |
| Track Frame - Right | Good |
| Carrier Rollers Front | Left: 186 Measurement, Left: 46% Worn, Right: 187 Measurement, Right: 44% Worn |
| Carrier Rollers Rear | Left: 0 Measurement, Right: 0 Measurement |
| Idlers Front | Left: 27 Measurement, Left: 24% Worn, Right: 27 Measurement, Right: 24% Worn |
| Idlers Rear | Left: 26 Measurement, Left: 16% Worn, Right: 26 Measurement, Right: 16% Worn |
| Links | Left: 41.1 Measurement, Left: 17% Worn, Right: 40.9 Measurement, Right: 20% Worn |
| Pins & Bushings (External) | Left: 12.9 Measurement, Left: 10% Worn, Right: 12.9 Measurement, Right: 10% Worn |
| Pins & Bushings (Internal) | Left: 0 Measurement, Right: 0 Measurement |
| Segments | Left: 222 Measurement, Left: 15% Worn, Right: 222 Measurement, Right: 15% Worn |
| Track Roller 1 | Left: 38.2 Measurement, Left: 57% Worn, Right: 38.4 Measurement, Right: 55% Worn |
| Track Roller 10 | Left: 0 Measurement, Right: 0 Measurement |
| Track Roller 2 | Left: 39.5 Measurement, Left: 53% Worn, Right: 39.7 Measurement, Right: 53% Worn |
| Track Roller 3 | Left: 0 Measurement, Right: 0 Measurement |
| Track Roller 4 | Left: 39.4 Measurement, Left: 55% Worn, Right: 39.4 Measurement, Right: 55% Worn |
| Track Roller 5 | Left: 39.1 Measurement, Left: 57% Worn, Right: 39.5 Measurement, Right: 53% Worn |
| Track Roller 6 | Left: 0 Measurement, Right: 0 Measurement |
| Track Roller 7 | Left: 39.5 Measurement, Left: 53% Worn, Right: 39.6 Measurement, Right: 53% Worn |
| Track Roller 8 | Left: 36.5 Measurement, Left: 64% Worn, Right: 36.4 Measurement, Right: 65% Worn |
| Track Roller 9 | Left: 0 Measurement, Right: 0 Measurement |
| Housings, Left | Good |
| Housings, Right | Fair |
| Planetaries / Differential, Left | Good |
| Planetaries / Differential, Right | Good |
Have questions? Want to learn more? We’re happy to help and are glad to discuss the different ways Puckett Machinery Company can help you. We invite you to contact us today!
Contact Us