Used Excavators
2022 Cat 336-08
Price: $380,000
| Hours | 1919 |
| Rating | Good |
| Serial Number | RDL00190 |
| Condition | Used |
| Phone | +1 800 748 3095 |
| Contact | Bill Morgan |
| Location | Timmins, ON |
| Hours | 1919 |
| Rating | Good |
| Serial Number | RDL00190 |
| Condition | Used |
| Phone | +1 800 748 3095 |
| Contact | Bill Morgan |
| Location | Timmins, ON |
| Air Conditioner |
| Arrangement - Mass Excavator |
| Auxiliary Hydraulics Pressure - High Pressure |
| Boom - 1 Piece |
| Bucket |
| Car Body - Standard |
| Combined Hydraulics - Two Way |
| Connectivity Source - Product Link |
| Cross-border Transactions Must Be Conducted Through A Dealer Located In The Jurisdiction Where The Asset Is Physically Held Pre-sale. Pricing Does Not Include Additional Fees Associated With Cross-border Transactions. Any Such Fees Required To Comp |
| E-fence |
| Emissions Level - Epa - Epa Tier 4f |
| Engine Enclosures |
| Grading System - 2d |
| Guidance System |
| Hand And Foot Control |
| Lighting |
| Mirrors |
| Online Owner's Manual |
| Pilot Control |
| Radio - Bluetooth |
| Regulatory Marking |
| Regulatory Status - Cat_nr_epa/carb_mlit_r120_eu_china Export |
| Remaining Factory Warranty Original Delivery Date: 29may2023 48/6000 Powertrain |
| Stick - Medium |
| Straight Travel Pedal |
| Thumb Type - Hydraulic |
| Ultra Low Sulfur Diesel Fuel |
| Undercarriage, Long |
| Contact |
Name: Bill Morgan |
| Unit Number | OKL8272169 |
| Model | 336-08 |
| Serial Number | RDL00190 |
| Year | 2022 |
| Hours | 1919 |
| City | Timmins |
| State | ON |
| Country | CA |
| Rating | Good |
| Certification | None |
| Price | $380000 |
| Cleaning Required | Yes |
| Extra Fuel Tanks | No |
| Bumper | Poor |
| Car Body | Good |
| Catwalk | Good |
| Counterweight | Good |
| Crankcase Guard / Battery Box | Good |
| Decals | Poor |
| Draw Bar | Good |
| Eng. Enclose Hood / Stack | Good |
| Engine Doors | Good |
| Fenders | Good |
| Fiberglass | Good |
| Fuel Tank | Good |
| Grab Irons | Good |
| Hood | Good |
| Main Frame Welds | Good |
| Paint | Good |
| Plastic | Good |
| Pre-Cleaner Bowl | Good |
| Radiator Grill & Shroud | Good |
| Sheet Metal | Good |
| Steps / Ladder | Good |
| ROPS | Yes |
| ROPS Certification Plate | Yes |
| Safety Decals In Place | Yes |
| Safety Decals Legible | Yes |
| Fire Extinguisher | Good |
| Horn | Good |
| Current O&MM | Yes |
| Air Conditioner | Good |
| Dash Console | Good |
| Gauges | Good |
| Interior Lights | Good |
| Switches | Good |
| Windshield Wipers | Poor |
| Blow By | No |
| Knocking | No |
| Oil Leaks | Yes |
| Water in Oil | No |
| Fuel Injection System | Good |
| Governor | Good |
| Operating Condition - ENGINE | Good |
| Turbocharger / Blower | Good |
| Compression in Radiator | No |
| Coolers | Good |
| Fan | Good |
| Radiator | Good |
| Water Pump | Good |
| Block Heater | Yes |
| Ether Aid | Yes |
| Alternator | Good |
| Lighting | Good |
| Starter | Good |
| Wiring | Good |
| Boom Cylinder | Poor |
| Bucket Cylinder | Good |
| Control Linkage | Good |
| Filter Condition (CUT) | Good |
| Hose Lines | Good |
| Hydraulic Swivel | Good |
| Operating Condition - HYDRAULICS | Poor |
| Pump Drive | Good |
| Pumps & Valves | Good |
| Stick Cylinder | Good |
| Swing Gear | Good |
| Swing Motors | Good |
| Tank | Good |
| Thumb Cylinder | Good |
| Travel Motors | Good |
| Auger | No |
| Claw | No |
| Crusher | No |
| Grapple | No |
| Hammer | No |
| Pulverizer | No |
| Rake | No |
| Ripper | No |
| Shear | No |
| Thumb | Yes |
| Tilting Ditch Bucket | No |
| Vibratory Plate | No |
| Boom Condition | Good |
| Boom Pins | Good |
| Pins & Bushings - BOOM | Good |
| Pins & Bushings - STICK | Good |
| Stick Conditions | Good |
| Stick Pins | Good |
| Quick Coupler | No |
| Bucket Bottom | Good |
| Bucket Linkage | Good |
| Bucket Mounts | Good |
| Bucket Sides | Good |
| Teeth / Adapters | Good |
| Pins & Bushings Turned? | No |
| Track Frame - Left | Good |
| Track Frame - Right | Good |
| Carrier Rollers Front | Left: 6.10 Measurement, Left: 20% Worn, Right: 6.10 Measurement, Right: 20% Worn |
| Carrier Rollers Rear | Left: 6.10 Measurement, Left: 20% Worn, Right: 6.10 Measurement, Right: 20% Worn |
| Idlers Front | Left: 0.85 Measurement, Left: 21% Worn, Right: 0.85 Measurement, Right: 21% Worn |
| Idlers Rear | Left: 0.85 Measurement, Left: 21% Worn, Right: 0.85 Measurement, Right: 21% Worn |
| Pins & Bushings (External) | Left: 2.7 Measurement, Left: 35% Worn, Right: 2.7 Measurement, Right: 35% Worn |
| Pins & Bushings (Internal) | Left: 34.10 Measurement, Left: 10% Worn, Right: 34.10 Measurement, Right: 10% Worn |
| Segments | Left: 8.5 Measurement, Left: 20% Worn, Right: 8.5 Measurement, Right: 20% Worn |
| Track Roller 1 | Left: 6.70 Measurement, Left: 46% Worn, Right: 6.80 Measurement, Right: 22% Worn |
| Track Roller 2 | Left: 6.80 Measurement, Left: 22% Worn, Right: 6.80 Measurement, Right: 22% Worn |
| Track Roller 3 | Left: 6.80 Measurement, Left: 22% Worn, Right: 6.80 Measurement, Right: 22% Worn |
| Track Roller 4 | Left: 6.80 Measurement, Left: 22% Worn, Right: 6.80 Measurement, Right: 22% Worn |
| Track Roller 5 | Left: 6.80 Measurement, Left: 22% Worn, Right: 6.80 Measurement, Right: 22% Worn |
| Track Roller 6 | Left: 6.80 Measurement, Left: 22% Worn, Right: 6.80 Measurement, Right: 22% Worn |
| Track Roller 7 | Left: 6.80 Measurement, Left: 22% Worn, Right: 6.80 Measurement, Right: 22% Worn |
| Track Roller 8 | Left: 6.80 Measurement, Left: 22% Worn, Right: 6.80 Measurement, Right: 22% Worn |
Have questions? Want to learn more? We’re happy to help and are glad to discuss the different ways Puckett Machinery Company can help you. We invite you to contact us today!
Contact Us