Contact Us

6020 Hydraulic Mining Shovel

6020

Hydraulic Mining Shovel

Price: Request a Quote for Pricing

When we invited our customers to help us design the first of our “Next Generation” Cat® hydraulic shovels, they gave us three top priorities: Make it safe, keep it simple and make it reliable. We responded by developing the Cat 6020, which delivers the simplicity and versatility you desire, with valuable modern design features that set it apart from the competition.

The 6020 offers class-leading visibility and a cab designed for comfort, safety and efficiency. A walk-through and exchangeable power module contributes to easier serviceability. The 6020 is more fuel efficient than other shovels in its class, delivering efficiency and cost advantages. And its new C32B engine meets emission standards without the need for DEF, saving time and cost during maintenance.

Key Specs
Engine Output – SAE J1995 1040 hp
Bucket Payload 23.8 ton (US)
Operating Weight 253.8 ton (US)
Request a Quote Get Financing

Product Specifications for 6020

Engine Output – SAE J1995 1040 hp
Bucket Payload 23.8 ton (US)
Operating Weight 253.8 ton (US)
Note Specifications shown above apply to a Backhoe configuration. A frontless configuration is also available.
Standard Bucket Capacity 15.7 yd³
Buckets Equipped With – Special liner material covering main wear areas inside and outside
– Lip shrouds
– Wing shrouds
– Heel shrouds
Type (5) Float valve for boom down function
Type (3) Boom and stick stress-relieved after welding
Type (1) Boom and stick torsion-resistant with welded box design
Type (4) Catwalks with rails at boom
Type (2) High-tensile steel with solid steel castings at pivot areas
Swing Drive 2 compact planetary transmissions with axial piston motors
Parking Brake Wet multiple-disc brake, spring-loaded/hydraulically released
Swing Ring Triple-race roller bearing with sealed internal gearing
Features (1) Open swing circuit with auto slow down when joysticks in neutral
Features (2) All slew ring raceways and grease tub for internal gearing supplied by automatic, central lubrication system
Maximum Swing Speed 4.9 r/min
Operator's Eye Level (approximate) 18.04 ft
Internal Dimensions of Cab – Height 6.79 ft
Internal Dimensions of Cab – Width 5.33 ft
Components (6) Auxiliary fold-away seat with safety belt for 3rd person
Internal Dimensions of Cab – Length 7.32 ft
New BCS Features (5) USB, Lan (TCP/IP) and CAN BUS interfaces for data export
Components (10) Machine access via retractable access stairway, stairway angle approximately 45°, hydraulically operated
Components (1) Large cab floor window with removable grating for easy cleaning
Components (2) Pneumatically cushioned and multi-adjustable operator seat with lumbar support, safety belt, head- and armrests
New Board Control System (BCS) Features: Electronic monitoring, data logging and diagnostic system for vital signs & service data of engines, hydraulic & lube system
New BCS Features (1) Robust instrument panel including large (254 mm/10 in) color touch screen
Components (9) Roller blinds
Components (7) Operator Protective Guard (rock guard; approved according to ISO 10262:1998 [Top Guard]) compliant
Components (8) Windshield with parallel intermittent wiper/washer
New BCS Features (4) Fault memory capabilities
Components (11) Additional emergency ladder in close proximity to emergency escape window
Components (4) Joystick integrated in adjustable seat armrest
New BCS Features (2) On-screen troubleshooting assistance
Components (5) Full sized trainer seat with safety belt and work table
New BCS Features (3) Graphical data logging
Components (3) Safety switch in operator’s seat for automatic motion shutdown
Maximum Pressure – Swing – Acceleration 4495 psi
Maximum Swing Oil Flow 216 gpm
Maximum Pressure – Swing – Deceleration 5080 psi
Maximum Pressure – Travel 4495 psi
Electronic Pump Management Contains (3) Automatic return of main pumps to zero flow
Maximum Pressure – Attachment 4495 psi
Hydraulic Tank Capacity 740 gal (US)
Main Pumps 6 × variable swash plate pumps
Filters (3) Full-flow filters (10 μm) for cooling return circuit
Electronic Pump Management Contains (2) Dedicated circuit pump allocation
Filters (2) Full-flow filters (10 μm) for complete return circuit
Maximum Total Oil Flow 621 gpm
Filters (1) Full-flow high-pressure filters (100 μm) for main pumps, installed directly behind each pump
Filters (5) Transmission oil filter (40 μm)
Total Volume of Hydraulic Oil 925 gal (US)
Electronic Pump Management Contains (5) Reduced oil flow of main pumps at high hydraulic oil temperature and at high engine temperature
Electronic Pump Management Contains (4) Automatic rpm reduction of engine speed during working breaks
Features (1) Pressure cut-off function for all main pumps
Filters (4) Pressure filters (6 μm) for servo circuit
Features (2) Cooling of pump transmission gear oil
Electronic Pump Management Contains (1) Electronic load limit control
Maximum Altitude without Deration 3622 m (11,884 ft) – above sea level (a.s.l.)
Components (3) Heavy-duty air filters
Fuel Tank Capacity 951 gal (US)
Aspiration Turbocharged and air-to-air aftercooled
Bore 5.71 in
Stroke 6.38 in
Components (6) Large fuel tank allows for 24 hour machine operation
Make and Model Cat C32 ACERT
No. of Cylinders 12
Rated Speed 1800 min-1 (1,800 rpm)
Components (4) Two-stage fuel filter
Components (2) Micro processed engine management
Alternator 275A
Components (5) Additional high-capacity water separator including electric priming pump
Components (1) Hydraulically driven radiator fan with variable electronically controlled fan speed
Displacement 1959 in³
Net Power – SAE J1349 1032 hp
Gross Power – SAE J1995 1040 hp
Engine Model Cat C32 ACERT
Operating Weight 254 ton (US)
Bucket Payload 24 Sh Ton
Type (2) Grease supplied to swing roller bearing, all pivot points of attachment, and swing gearbox bearing
Capacity – Grease Barrel 54 gal (US)
Type (3) System condition and failures displayed by Board Control System
Type (1) Single-circuit progressive system with hydraulically driven heavy-duty pump and electronic time control
Features (1) Cooling system fully independent of all main circuits, i.e. controlled cooling capacity available whenever engine is running
Features (3) Superior cooling efficiency to ensure optimum oil temperature
Oil Flow of Cooling Pumps 211 gpm
Diameter – Fan 4.92 ft
Features (2) Variable electronically controlled flow of oil through cooler and fan speed
Ground Pressure 31.9 psi
Operating Weight 507500 lb
Standard Track Pads 2.62 ft
Net Power – SAE J1349 1032 hp
Emissions Meets China Nonroad Stage III emissions standards, equivalent to Tier 2
Gross Power – SAE J1995 1040 hp
Net Power – ISO 9249 1037 hp
Components (1) Emergency stop buttons inside cab, accessible from all seating locations, and engine module
Battery Isolation Relays manual lockable disconnect switch and automatic disconnect relay
Batteries (12V each) – In Series/Parallel Installation 630 Ah – 24V
Components (3) 9 LED high-brightness working flood lights: – 7 for working area
– 2 for rear end
System Voltage 24V
Components (6) 1 beacon lamp on cab roof
Components (5) 7 LED service lights
Batteries (12V each) 6 × 210 Ah
Components (2) Additional ground-level emergency stop
Components (4) 2 LED high-brightness access flood lights
Make and Model Cat C32 ACERT
Components (2) Dual Diesel Oxidation Catalysts (DOCs)
Fuel Tank Capacity 951 gal (US)
Bore 5.71 in
Displacement 1959 in³
Stroke 6.38 in
No. of Cylinders 12
Rated Speed 1,800 min-1 (1,800 rpm)
Components (7) Two-stage fuel filter
Components (3) MEUI™-C fuel system
Components (4) Hydraulically driven radiator fan with variable electronically controlled fan speed
Maximum Altitude without Deration 2925 m (9,600 ft) – above sea level (a.s.l.)
Components (1) Cat NOx reduction system
Alternator 275A
Components (5) Micro processed engine management
Aspiration Turbocharged and air-to-air aftercooled
Components (6) Heavy-duty air filters
Components (8) Additional high-capacity water separator including electric priming pump
Components (9) Large fuel tank allows for 24 hour machine operation
Travel Drives – Each Side 1 planetary transmission with 2 two-stage axial piston motors
Gradeability – Travel Drives Approximately 54%
Components (3) All running surfaces of sprockets, idlers, rollers and track chain links hardened
Support Rollers – Each Side 3
Maximum Tractive Force 265860 lbf
Track Pads – Each Side 45
Components (1) Forged double-grouser track pads
Components (2) Chain links connected by hardened pins and bushings
Travel Speed – 2nd Stage – Maximum 1.49 mile/h
Components (6) Audible travel alarm
Components (4) Fully hydraulic self-adjusting track tensioning system with accumulator
Bottom Rollers – Each Side 8
Travel Speed – 1st Stage – Maximum 0.68 mile/h
Parking Brakes Wet multiple disc brake, spring loaded/hydraulically released
Components (5) Automatic hydraulic retarder valve to prevent overspeed on downhill travel
Engine Model Cat® C32 ACERT™
Net Power – SAE J1349 1019 hp
Gross Power – SAE J1995 1033 hp
Maximum Digging Reach 52.17 ft
Maximum Digging Depth 26.57 ft
Maximum Digging Height 45.6 ft
Standard Bucket Capacity – Backhoe (Heaped 1:1) 15.7 yd³
Equipped With (3) Indicator light for hydraulic tank full
Features Centralized service area accessible from ground level.
Equipped With (2) Cat jump-start socket
Equipped With (1) Quick couplings for: – Diesel fuel
– Engine coolant
– Pump transmission gear oil
– Engine oil (oil pan)
– Hydraulic oil
Maximum Tearout Force 146125 lb
Maximum Breakout Force 164050 lb
Gross Power – SAE J1995 1033 hp
Net Power – SAE J1349 1019 hp
Net Power – ISO 9249 1024 hp
Emissions Meets Tier 4 Final and Stage V emissions standards
2 x Cat C32B engines
Aftertreatment system (used in Tier 4 Final only): – Diesel Oxidation Catalyst (DOC) – NOx Reduction System (NRS) – Non-DEF solution
Air-to-Air After Cooling (ATAAC)
Turbocharger
Hydraulically driven radiator fan
Electronically controlled fan speed
Micro processed engine management
Cat Clean Emission Module (CEM) air filters
Two-stage fuel filter with series filtration
High-capacity water seperator
Starting aid – automatic ether
Exhaust manifold and turbo heat shields
Dual 24 V electric starters per engine
Automatic engine idle shut down
Automatic fuel priming
Pump managing system with: – Electronic load limit control – Flow on demand – Automatic zero flow regulation – Automatic engine RPM reduction – Reduced oil flow at high hydraulic oil or engine temperature
Pressure cut – off for main pumps
Cat Hydraulic Hose assemblies
Hydraulic Optimization
Cooling of pump transmission gear oil
Open loop swing circuit
Pressure testing poings
Full-flow high-pressure filters (100 µm), main pumps
Full-flow filters (10 µm), return circuit
Full-flow filters (10 µm), cooling return circuit
Pressure filters (6 µm), servo circuit
Transmission oil filters (40 µm)
Boom float valve
6 batteries
Lockable battery isolator switch
Lockable starter isolator switch
9 LED high-brightness working flood lights
7 LED service lights
Travel alarm – forward and reverse
Electric Horn
Forged double-grouser track pads
800 mm (2 ft 8 in) wide track pads
HD fixed axle carrier and load rollers
Automatic hydraulic retarder valve
Hinged travel motor covers
Hardened running surfaces of sprockets, idlers, rollers, pad links, teeth contact areas
Fully hydraulic self-adjusting track tensioning system with piston accumulators
Grease filters (200 µm)
Single HVAC system
In-floor window with removable grate
Pneumatically cushioned and multiadjustable comfort seat with: – Lumbar support – Head and arm rests – Safety switch for automatic motion shutdown
Independently adjustable seat consoles with integrated joysticks
Electronic-Hydraulic Servo Control
Elevated full-size trainer seat with 2-point safety belt and laptop desk
FM/AM radio with USB and AUX input
Additional fold-away auxiliary seat with 2-point safety belt
Three cup holders
Parallel intermittent wiper/washer
Roller blinds at all windows
Monitoring system with 254 mm (10 in) color touchscreen
Cat Board Control system: – 254 mm mm (10 in) color touchscreen – On-screen troubleshooting assistance – On-screen graphic charts of logged data – Fault memory of related conditions – USB, LAN (TCP/IP) and CAN BUS interfaces for data export
Control and Monitoring Platform (CAMP)
Powered 45° access stairway
One mirror on Left Hand (LH) side
Document storage
Internal service access in boom
Boom and stick thermally stress relieved after welding
Catwalks with rails at boom
Wear Package (as per bucket selection)
Cat MineStar™ Solutions ready
Engine oil exchange interval – 500 hours
Hydraulic oil change interval – 10,000 hours
S·O·SSM sampling ports
Cat CEM air filters with precleaner dust ejection system
Ground level service station with quick couplings for: – Diesel fuel – Engine coolant – Pump transmission gear oil – Engine oil – Hydraulic oil – Grease
Cat battery charging connector
Indicator lights
Emergency stop switches in cab, engine module, 1 pull rope accessible from ground level
Operator Protective Guard (Top Guard)
All-round safety glass
Emergency egress ladder
ISO or American National Standards Institue (ANSI) decals