The Cat® 140 GC motor grader delivers reliable performance and fuel efficiency for roadwork, site prep, and grading. Easy service access and operator comfort features boost productivity and reduce operating costs.
| Net Power – ISO 9249/SAE J1349 | 197 hp |
| Operating Weight – Typically Equipped | 38725 lb |
| Blade Width | 12 ft |
| Net Power – ISO 9249/SAE J1349 | 197 hp |
| Bore | 4.1 in |
| Derating Altitude | 9842 ft |
| Displacement | 427.8 in³ |
| Emissions | U.S. EPA Tier 4 Final/EU Stage V |
| Engine Model | Cat 7.1 |
| Engine RPM | 2,200 |
| Standard Capability | 109 °F |
| High – Ambient Capability | 122 °F |
| Maximum Torque – ISO 9249 | 616 lb/ft |
| Stroke | 5.3 in |
| Torque Rise – ISO 9294 | 40% |
| Number of Cylinders | 6 |
| Note (1) | Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 standards in effect at the time of manufacture. |
| Note (2) | Net power advertised is the power available at rated speed of 2,200 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. |
| Note (3) | Power as declared per ISO 14396 |
| Operating Weight – Typically Equipped | 38725 lb |
| Note | *Typically equipped operating weight is calculated with full fuel tank, coolant, lubricants, operator, push block, rear ripper, tires on multi-piece rims (*17.5-25 Bias/**17.5R-25), and other equipment. |
| Blade Width | 12 ft |
| Arc Radius | 16.3 in |
| Blade Height | 24 in |
| Cutting Edge Width | 6 in |
| End Bit | 6 in |
| Throat Clearance | 4.4 in |
| Width All Wheel Drive (AWD) | 99.3 in |
| Length of Machine* | 406.7 in |
| Maximum Height | 132.4 in |
| Width | 95.6 in |
| Note | *Typically equipped with push block and ripper. |
| Circle Center Shift Left | 29.6 in |
| Circle Center Shift Right | 28.7 in |
| Maximum Depth of Cut | 28.1 in |
| Maximum Lift Above Ground | 18.7 in |
| Maximum Shoulder Reach Left | 74.3 in |
| Maximum Shoulder Reach Right | 71.3 in |
| Moldboard Side Shift Left | 25.6 in |
| Moldboard Side Shift Right | 20.7 in |
| Blade Tip Range Backward | 5 |
| Blade Tip Range Forward | 40 |
| Fuel Tank | 78 gal (US) |
| Circle Drive with Slip Clutch | 2 gal (US) |
| Circle Drive without Slip Clutch | 0.5 gal (US) |
| Cooling System | 40 l |
| Engine Crankcase | 5.5 gal (US) |
| Diesel Exhaust Fluid Tank (Tier 4 Only) | 4.2 gal (US) |
| Hydraulic System | 11.9 gal (US) |
| Transmission | 4.8 gal (US) |
| All-Wheel Drive Weight (AWD) (Stage V)* | 40543 lb |
| All-wheel Drive Weight (AWD) (Tier 4 Final)** | 42119 lb |
| Weight (Tier 4 Final)** | 40488 lb |
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. |
| Standard and optional equipment may vary. Consult your Cat dealer for details. |
| Standard Seat |
| Steering Wheel/Lever Controls |
| Base Cab |
| Information Display Screen |
| Halogen Lighting |
| Entertainment Radio Ready |
| Product Link |
| Cell Phone Holder |
| Cat C7.1 |
| Eco mode |
| On-Demand Fan |
| No-Spin Differential |
| Parking Brake |
| Signaling/Warning Horn |
| Rearview Mirror |
| Hydraulic Brakes |
| Sideview Mirrors |
| Walkways and Grab Rails |
| Hydraulic System with Integrated Work Port Pressure Relief |
| Hydraulic System with Integrated Dead Engine Implement Lower |
| Standard and optional equipment may vary. Consult your Cat dealer for details. |
| Mechanical Suspension Seat |
| Air Suspension Seat |
| ROPS/FOPS |
| Heating/Cooling Cab System |
| Rear Wiper |
| Canopy |
| Cab Plus |
| Rear Window Screen |
| Front Wipers |
| Digital Blade Slope Meter |
| Reversing Fan |
| All-Wheel Drive (AWD) |
| Circle Drive Slip Clutch |
| Circle Saver |
| Rearview Camera |
| Secondary Steering System |
| Front View Camera |
| Four-point Safety Harness Seat Belt |
| Scarifier |
| Counterweight |
| Push Block |
| Front Lift Group From Factory |
| Snow Wing |
| Front Blade |
| L3 Tires |
| Sy-Klone Pre-Cleaner |
