150 Motor Grader

Net Power Range (Tier 4)	200 hp
Engine Model	Cat® C9.3
Bore	4.5 in
Stroke	5.9 in
Speed at Rated Power	2,000 rpm
VHP Plus – Gear – Net Power – Forward 2nd	210 hp
VHP Plus – Gear – Net Power – Forward 3rd	220 hp
Emissions	U.S. EPA Tier 4 Final/EU Stage V
VHP Plus – Gear – Net Power – Forward 6th	241 hp
VHP Plus – Gear – Net Power – Forward 4th	231 hp
VHP Plus Range – Net	149-188 kW (200-252 hp)
VHP Plus – Gear – Net Power – Forward 5th	236 hp
VHP Plus – Gear – Net Power – Reverse 1st	200 hp
VHP Plus – Gear – Net Power – Forward 1st	200 hp
VHP Plus – Gear – Net Power – Reverse 2nd	210 hp
Maximum Torque – VHP Plus	920 lb/ft
VHP Plus Range – Net – Metric	149-188 kW (202-255 hp)
Base Power (1st Gear) – Net – Metric	202 hp
VHP Plus – Gear – Net Power – Forward 7th	247 hp
Torque Rise	39%
VHP Plus – Gear – Net Power – Reverse 3rd-6th	220 hp
High Ambient – Fan Speed – Standard	1,400 rpm
Standard Capability	109 °F
VHP Plus – Gear – Net Power – Forward 8th	252 hp
Displacement	567.5 in³
Number of Cylinders	6
Derating Altitude	10000 ft
High Ambient – Fan Speed – Maximum	1,550 rpm
High Ambient – Fan Speed – Minimum	500 rpm
High – Ambient Capability	122 °F

Operating Weight – Typically Equipped	43950 lb
Gross Vehicle Weight – Maximum – Front Axle	17075 lb
Gross Vehicle Weight – Maximum – Rear Axle	38069 lb
Operating Weight – Typically Equipped – Front Axle	12549 lb
Operating Weight – Typically Equipped – Rear Axle	31401 lb
Gross Vehicle Weight – Base – Front Axle	9601 lb
Gross Vehicle Weight – Base – Rear Axle	28590 lb
Gross Vehicle Weight – Maximum – Total	55144 lb
Gross Vehicle Weight – Base – Total	38191 lb
Operating Weight – Typically Equipped – Total	43950 lb

Blade Width	12 ft
Moldboard – Height	24 in
Moldboard – Thickness	0.87 in
Arc Radius	16.3 in
Throat Clearance	6.5 in
Cutting Edge Width	6 in
Cutting Edge Thickness	0.6 in
End Bit – Width	6 in
End Bit – Thickness	0.6 in
Blade Pull – Base GVW	25732 lb
Blade Pull – Maximum GVW	34262 lb
Blade Down Pressure – Base GVW	16480 lb
Blade Down Pressure – Maximum GVW	29308 lb
Moldboard – Blade Width	12 ft

Top Speed – Forward	29 mile/h
Top Speed – Reverse	23 mile/h
Turning Radius – Outside Front Tires	25.59 ft
Steering Range – Left/Right	50°
Articulation Angle – Left/Right	20°
Forward – 1st	2.5 mile/h
Forward – 2nd	3.4 mile/h
Forward – 3rd	5 mile/h
Forward – 4th	6.9 mile/h
Forward – 5th	10.6 mile/h
Forward – 6th	14.5 mile/h
Forward – 7th	19.9 mile/h
Forward – 8th	29 mile/h
Reverse – 1st	2 mile/h
Reverse – 2nd	3.7 mile/h
Reverse – 3rd	5.4 mile/h
Reverse – 4th	8.4 mile/h
Reverse – 5th	15.7 mile/h
Reverse – 6th	23 mile/h

Fuel Capacity	104 gal (US)
Cooling System	15 gal (US)
Hydraulic System – Total	26.4 gal (US)
Hydraulic System – Tank	16.9 gal (US)
Diesel Exhaust Fluid	5.8 gal (US)
Transmission – Differential – Final Drives	18.5 gal (US)
Engine Oil	7.9 gal (US)
Tandem Housing – Each	20 gal (US)
Front Wheel Spindle Bearing Housing	0.13 gal (US)
Circle Drive Housing	1.8 gal (US)

Forward/Reverse Gears	8 Forward/6 Reverse
Transmission	APECS, Direct Drive, Powershift
Brakes – Service	Multiple Oil Disc
Brakes – Service – Surface Area	3565 in²
Brakes – Parking	Multiple Oil Disc
Brakes – Secondary	Dual Circuit

Circuit Type	Parallel
Pump Type	Variable Piston
Pump Output	55.7 gpm
Maximum System Pressure	3500 psi
Reservoir Tank Capacity	16.9 gal (US)
Standby Pressure	885 psi

Drawbar – Width	3 in
Circle – Diameter	60.2 in
Circle – Blade Beam Thickness	1.6 in
Drawbar – Height	6 in
Front Frame Structure – Width	12 in
Front Frame Structure – Height	12.6 in
Circle – Height	5.4 in
Drawbar – Thickness	0.5 in
Front-Top/Bottom Plate – Width	12 in
Front-Top/Bottom Plate – Thickness	0.87 in
Front Axle – Height to Center	23.5 in
Front Axle – Wheel Lean – Left/Right	18°
Front Axle – Total Oscillation per Side	32°

Circle Centershift – Right	28.7 in
Circle Centershift – Left	27.4 in
Moldboard Sideshift – Right	26 in
Moldboard Sideshift – Left	20.1 in
Maximum Blade Position Angle	90°
Blade Tip Range – Forward	40°
Blade Tip Range – Backward	5°
Maximum Shoulder Reach Outside of Tires – Right	77.9 in
Maximum Shoulder Reach Outside of Tires – Left	70.5 in
Maximum Lift Above Ground	18.9 in
Maximum Depth of Cut	28.1 in

Ripping Depth – Maximum	16.8 in
Ripper Shank Holder Spacing	21 in
Ripper Shank Holders	5
Penetration Force	20812 lb
Pry-Out Force	27794 lb
Machine Length Increase, Beam Raised	40.6 in

Rear – Scarifying Depth, Maximum	16.8 in
Front, V-Type, 5 or 11 Tooth – Scarifier Shank Holder Spacing	4.6 in
Mid, V-Type – Scarifier Shank Holder Spacing	4.6 in
Mid, V-Type – Scarifier Shank Holders	11
Front, V-Type, 5 or 11 Tooth – Scarifier Shank Holders	5 or 11
Front, V-Type, 5 or 11 Tooth – Working Width	40.6 in
Front, V-Type – Working Width	47.4 in
Front, V-Type, 5 or 11 Tooth – Scarifying Depth, Maximum	18.4 in
Mid, V-Type – Scarifying Depth, Maximum	11.5 in
Mid, V-Type – Working Width	46.6 in
Rear – Working Width	84 in
Rear – Scarifier Shank Holders	9
Rear – Scarifier Shank Holder Spacing	10.5 in

Brakes	ISO 3450
Steering	ISO 5010
ROPS/FOPS	ISO 3471/ISO 3449
Sound	ISO 6394; ISO 6395

Air Conditioning

The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. – If equipped with R134a (Global Warming Potential = 1430), the system con

Height	19.9 in
Width	7.9 in
Sidewall Thickness – Inner	0.63 in
Sidewall Thickness – Outer	0.71 in
Drive Chain Pitch	2 in
Wheel Axle Spacing	60 in
Tandem Oscillation – Front Up	15°
Tandem Oscillation – Front Down	25°

Height – Top of Cab	130 in
Length – Counterweight to Ripper	399 in
Width – Outside Front Tires	98.9 in
Length – Front Axle to Mid Tandem	241 in
Length – Front Tire to Rear of Machine	351 in
Length – Front Axle to Moldboard	100 in
Length – Between Tandem Axles	60 in
Width – Outside Rear Tires	98.9 in
Width – Tire Center Lines	84.3 in
Height – Front Axle Center	23.5 in
Height – Exhaust Stack	128 in
Height – Top of Cylinders	120 in
Ground Clearance – Rear Axle	13.3 in

Standard and optional equipment may vary. Consult your Cat dealer for details.

Air cleaner, dual stage, dry type, diesel, with automatic engine derate and automatic dust ejector, service indicator through Cat Messenger

Air-to-air after cooler (ATAAC)

Belt, serpentine, automatic tensioner

Brakes, oil disc, four-wheel, hydraulic

Demand fan, hydraulic, swing-out

Diesel exhaust fluid tank, 22.0 L (5.8 gal) ground level access, and sediment drain

Differential Lock/Unlock, Automatic

Drain, engine oil, ecology

Economy mode

Electronic over speed protection

Engine, C9.3 U.S. EPA Tier 4 Final/EU Stage V emission standards

Fuel tank, 394 L (104 gal), ground level access and sediment drain

Parking brake – multi-disc, sealed, oil-cooled

Priming pump, fuel

Rear axle, modular

Sediment drain, fuel tank

Tandem drive

Transmission, 8F/6R, powershift, direct drive, Advanced Productivity Electronic Control Strategy (APECS)

Alarm, back up

Alternator, 150 ampere, sealed

Batteries, maintenance free, heavy duty, 1125 CCA

Breaker panel, ground accessible

Cab harness and electrical hydraulic valves

Electrical system, 24V

Grade Control Ready – Cab harness, software, electrical hydraulic valves, bosses and brackets

Lights, roof-mounted roading, reversing, LED stop and tail

Product Link

Starter, electric

Accelerator

Air conditioning with heater

Arm and wrist rest, electronically adjustable

Articulation, automatic Return-to-Center

Cat Messenger operator information system

Centershift pin indicator

Coat hook

Cup holder

Display, digital speed and gear

Doors, left and right side with wiper

Gauge, machine level

Gauge cluster (analog) – fuel, articulation, engine coolant temp, engine RPM, hydraulic oil temp, regen, DEF

Hour meter, digital

Joystick hydraulic controls right/left blade lift with float position, circle drive, blade sideshift and tip, centershift, front wheel lean, articulation and power steering

Joystick, adjustable armrests

Joystick gear selection

Joystick hydraulic power steering

Ladders, cab, left and right side

Lights, night time cab

Mirror, inside rearview, wide angle

Power port, 12V

Radio Ready, Entertainment

ROPS cab, sound suppressed 70 dB(A)

Seat, cloth-covered, comfort suspension

Seat belt, retractable 76 mm (3 in)

Storage area for cooler/lunchbox

Throttle control, electronic

Windows, laminated glass: – fixed front with intermittent wiper – door with intermittent wipers (3)

Windows: tempered: – left and right side wipers – rear and intermittent wiper

Antifreeze

Extended Life Coolant to -35° C (-30° F)

Partial allowance for tires on 254 — 607 mm (10 — 24 in) multi-piece rims is included in the base machine price and weight

Accumulators, brake, dual certified

Anti-glare paint

Bumper, rear, integrated with hitch

CD ROM Parts Book

Clutch, circle drive slip

Cutting edges: – 152 — 16 mm (6 — 5/8 in) – curved DH-2 steel – 19 mm (3/4 in) mounting bolts

Doors (3), engine compartment, locking

Drawbar – 6 shoes, replaceable wear strips

Electrical hydraulic valves, hydraulic lines for base 8 functions

Endbits: – 16 mm (5/8 in) DH-2 steel – 19 mm (3/4 in) mounting bolts

Fluid check, ground level

Frame, articulated, with safety lock

Ground level engine shutdown

Hammer (emergency exit)

Horn, electric

Hydraulic lines for base functions

Lockout, hydraulic implement (for roading and servicing)

Moldboard

Mounting, cab roof accessories

Pump, hydraulic, high capacity, 98 cm³ (6 in³)

Radiator, cleanout access (both sides with swing doors)

Secondary steering

Serviceability, LH side

S·O·S„ ports: engine, hydraulic, transmission, coolant, fuel

Tandem walkway/guards

Tool box

Standard and optional equipment may vary. Consult your Cat dealer for details.

Alternator, 280 ampere

Batteries: extreme duty, 1,400 CCA

Lights: Headlights, high

Lights: Headlights, low

Lights: Working lights, basic

Lights: Working lights, plus, LED

Lights: Warning: beacon or strobe

Lights: Mounting for warning light

Articulation guard

Fenders, front

Fenders, rear

Front axle guard

Sound suppression (bottom)

Sound suppression (enclosure)

Transmission

Mirrors, outside: heated 24V

Mirrors, outside: mounted

Comfort Plus Arrangement

Comfort Premium Arrangement

All Wheel Drive

Precleaner, snow

Starter, extreme duty, 1,000 Amps

Transmission, autoshift

Attachment Ready Option (ARO)

Cross Slope

Accumulators, blade lift

Camera, rearview

Cat Product Link 321SR

Cat Product Link 522

Drain, ecology, engine Wiggins

Heater, engine coolant: 120V

Heater, engine coolant: 240V

Hydraulic arrangements with one or more additional hydraulic valves are available for rear ripper, dozer, snow plow and snow wing.

Snow wing mounting, frame ready

Starting aid, ether

Reversing fan, automatic or manual

Cat Grade with 3D

Blade extension, left hand, 610 mm (2 ft)

Blade extension, right hand, 610 mm (2 ft)

Counterweight

Cutting edges, curved

Endbits, overlay

Front lift group, mounting

Front lift group, mechanical

Grader bit, narrow and super penetration

Mid-Mount Scarifier, Package

Moldboard: 4267 mm — 610 mm — 22 mm (14 ftÃ— 24 in — 7/8 in)

Moldboard: 4267 mm — 686 mm — 25 mm (14 ft — 27 in — 1 in)

Push plate

Ripper, rear

Ripper tooth

Scarifier, front

Snow Arrangement

Snow Wing Ready Package

Tow hitch

Canadian Arrangement

European Arrangement

TUV Roading Arrangement

Rim Size – 9 × 24; Wheel Group – Single-Piece; Tires – 14.0R24

Rim Size – 13 × 25; Wheel Group – Single-Piece; Tires – 17.5R25

Rim Size – 10 × 24; Wheel Group – Multi-Piece; Tires – 14.0R24

Rim Size – 10 × 24; Wheel Group – Multi-Piece; Tires – 14.0-24

Rim Size – 14 × 25; Wheel Group – Multi-Piece; Tires – 17.5R25

Rim Size – 14 × 25; Wheel Group – Multi-Piece; Tires – 17.5-25

Note: Consult your dealer for individual tire width, size and brand.

150 / 150 AWD JOY

150 Motor Grader

Price: Request a Quote for Pricing

Product Specifications for 150 / 150 AWD JOY

Net Power Range (Tier 4)	200 hp
Operating Weight – Typically Equipped	43950 lb
Blade Width	12 ft