The Cat® 160/160 AWD Motor Grader delivers power, efficiency, and operating finesse to the job. Joystick controls provide ergonomic comfort for the operator. This high-performance machine minimizes emissions with the latest control technologies, without loss of productivity.
| Net Power Range (Tier 4) | 224 hp |
| Operating Weight – Typically Equipped | 45547 lb |
| Blade Width | 14 ft |
| Net Power Range (Tier 4) | 224 hp |
| Engine Model | Cat® C9.3 |
| Emissions | U.S. EPA Tier 4 Final/EU Stage V |
| Bore | 4.5 in |
| Displacement | 567.5 in³ |
| Stroke | 5.9 in |
| Number of Cylinders | 6 |
| Torque Rise | 39% |
| Maximum Torque – VHP Plus | 1000 lb/ft |
| Derating Altitude | 10000 ft |
| Operating Weight – Typically Equipped | 45547 lb |
| Blade Width | 14 ft |
| Cutting Edge Thickness | 0.6 in |
| Cutting Edge Width | 6 in |
| End Bit – Thickness | 0.6 in |
| End Bit – Width | 6 in |
| Moldboard – Blade Width | 14 ft |
| Moldboard – Height | 24 in |
| Moldboard – Thickness | 0.87 in |
| Throat Clearance | 6.5 in |
| Blade Down Pressure – Base GVW | 17004 lb |
| Blade Down Pressure – Maximum GVW | 29308 lb |
| Blade Pull – Base GVW | 25931 lb |
| Blade Pull – Maximum GVW | 34262 lb |
| Arc Radius | 16.3 in |
| Height – Top of Cab | 130 in |
| Length – Counterweight to Ripper | 399 in |
| Ground Clearance – Rear Axle | 13.3 in |
| Maximum Lift Above Ground | 17.8 in |
| Maximum Depth of Cut | 29.5 in |
| Maximum Blade Position Angle | 90 |
| Maximum Shoulder Reach Outside of Tires – Left | 82.3 in |
| Maximum Shoulder Reach Outside of Tires – Right | 89.7 in |
| Moldboard Sideshift – Left | 20.1 in |
| Moldboard Sideshift – Right | 26 in |
| Blade Tip Range – Backward | 5 |
| Blade Tip Range – Forward | 40 |
| Circle Centershift – Left | 27.4 in |
| Circle Centershift – Right | 28.7 in |
| Front Frame Structure – Height | 12.6 in |
| Front Frame Structure – Width | 12 in |
| Front Axle – Height to Center | 23.5 in |
| Front Axle – Total Oscillation per Side | 32 |
| Front Axle – Wheel Lean – Left/Right | 18 |
| Front-Top/Bottom Plate – Thickness | 0.87 in |
| Front-Top/Bottom Plate – Width | 12 in |
| Drawbar – Height | 6 in |
| Drawbar – Thickness | 0.5 in |
| Drawbar – Width | 3 in |
| Circle – Blade Beam Thickness | 1.6 in |
| Circle – Diameter | 61.1 in |
| Circle – Height | 6.3 in |
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. – If equipped with R134a (Global Warming Potential = 1430), the system con |
| Transmission | APECS, Direct Drive, Powershift |
| Forward/Reverse Gears | 8 Forward/6 Reverse |
| Brakes – Service – Surface Area | 3565 in² |
| Brakes – Service | Multiple Oil Disc |
| Brakes – Parking | Multiple Oil Disc |
| Brakes – Secondary | Dual Circuit Control |
| Fuel Capacity | 104 gal (US) |
| Diesel Exhaust Fluid | 5.8 gal (US) |
| Circle Drive Housing | 1.8 gal (US) |
| Cooling System | 15 gal (US) |
| Hydraulic System – Total | 26.4 gal (US) |
| Hydraulic System – Tank | 16.9 gal (US) |
| Transmission – Differential – Final Drives | 18.5 gal (US) |
| Tandem Housing – Each | 22.9 gal (US) |
| Engine Oil | 7.9 gal (US) |
| Front Wheel Spindle Bearing Housing | 0.13 gal (US) |
| Ripping Depth – Maximum | 16.8 in |
| Ripper Shank Holders | 5 |
| Ripper Shank Holder Spacing | 21 in |
| Machine Length Increase, Beam Raised | 40.6 in |
| Penetration Force | 20812 lb |
| Pry-Out Force | 28493 lb |
| Mid, V-Type – Working Width | 46.6 in |
| Mid, V-Type – Scarifier Shank Holders | 11 |
| Mid, V-Type – Scarifier Shank Holder Spacing | 4.6 in |
| Mid, V-Type – Scarifying Depth, Maximum | 11.5 in |
| Rear – Scarifier Shank Holders | 9 |
| Rear – Scarifier Shank Holder Spacing | 10.5 in |
| Rear – Scarifying Depth, Maximum | 16.8 in |
| Rear – Working Width | 84 in |
| Front, V-Type – Working Width | 47.4 in |
| Front, V-Type, 5 or 11 Tooth – Scarifier Shank Holders | 5 or 11 |
| Front, V-Type, 5 or 11 Tooth – Scarifier Shank Holder Spacing | 4.6 in |
| Front, V-Type, 5 or 11 Tooth – Scarifying Depth, Maximum | 18.4 in |
| Front, V-Type, 5 or 11 Tooth – Working Width | 40.6 in |
| Top Speed – Forward | 29.5 mile/h |
| Top Speed – Reverse | 23.3 mile/h |
| Articulation Angle – Left/Right | 20° |
| Steering Range – Left/Right | 50° |
| Turning Radius – Outside Front Tires | 25.59 ft |
| Standard and optional equipment may vary. Consult your Cat dealer for details. |
| Air cleaner, dual stage, dry type, diesel, with automatic engine derate and automatic dust ejector, service indicator through Cat Messenger |
| Air-to-air after cooler (ATAAC) |
| Belt, serpentine, automatic tensioner |
| Brakes, oil disc, four-wheel, hydraulic |
| Demand fan, hydraulic, swing-out |
| Diesel exhaust fluid tank, 22.0 L (5.8 gal) ground level access, and sediment drain |
| Differential lock/unlock, automatic |
| Drain, engine oil, ecology |
| Eco mode |
| Electronic overspeed protection |
| Engine, C9.3 U.S. EPA Tier 4 Final/EU Stage V emission standards |
| Fuel tank, 394 L (104 gal), ground level access and sediment drain |
| Parking brake – multi-disc, sealed, oil-cooled |
| Priming pump, fuel |
| Rear axle, modular |
| Sediment drain, fuel tank |
| Tandem drive |
| Transmission, 8F/6R, powershift, direct drive, Advanced Productivity Electronic Control Strategy (APECS) |
| Alarm, back up |
| Alternator, sealed 150 ampere |
| Batteries, maintenance free, heavy duty, 1125 CCA |
| Breaker panel, ground accessible |
| Cab harness and electrical hydraulic valves |
| Electrical system, 24V |
| Grade Control Ready, cab harness, software, electrical hydraulic valves, bosses and brackets |
| Lights, roof-mounted roading, reversing, LED stop, and tail |
| Product Link |
| Starter, electric |
| Accelerator |
| Air conditioning with heater |
| Arm and wrist rest, electronically adjustable |
| Articulation, automatic return-to-center |
| Cat Messenger operator information system |
| Centershift pin indicator |
| Coat hook |
| Cup holder |
| Display, digital speed and gear |
| Doors, left and right side with wiper |
| Gauge, machine level |
| Gauge cluster (analog) – fuel, articulation, engine coolant temp, engine RPM, hydraulic oil temp, regen, DEF |
| Hour meter, digital |
| Joystick hydraulic controls right/left blade lift with float position, circle drive, blade sideshift and tip, centershift, front wheel lean, articulation and power steering |
| Joystick, adjustable armrests |
| Joystick gear selection |
| Joystick hydraulic power steering |
| Ladders, cab, left and right side |
| Lights, night time cab |
| Mirror, inside rearview, wide angle |
| Power port, 12V |
| Radio ready, entertainment |
| Rollover protective Structure (ROPS) cab, sound suppressed 70 dB(A) |
| Seat, cloth-covered, comfort suspension |
| Seat belt, retractable 76 mm (3 in) |
| Storage area for cooler/lunchbox |
| Throttle control, electronic |
| Windows, laminated glass: – fixed front with intermittent wiper – door with intermittent wipers (3) |
| Windows, tempered – left and right side wipers, rear and intermittent wiper |
| Antifreeze |
| Extended lifecoolant to -35° C (-30° F) |
| Partial allowance for tires on 254 – 607 mm (10 – 24 in) multi-piece rims is included in the base machine price and weight |
| Accumulators, brake, dual certified |
| Anti-glare paint |
| Bumper, rear, integrated with hitch |
| CD ROM parts book |
| Clutch, circle drive slip |
| Cutting edges: – 152 16 mm (6 5/8 in) – curved DH-2 steel – 19 mm (3/4 in) mounting bolts |
| Doors (3), engine compartment, locking |
| Drawbar, 6 shoes, replaceable wear strips |
| Electrical hydraulic valves, hydraulic lines for base 8 functions |
| Endbits, – 16 mm (5/8 in) DH-2 steel – 19 mm (3/4 in) mounting bolts |
| Fluid check, ground level |
| Frame, articulated, with safety lock |
| Engine shutdown, ground level |
| Hammer (emergency exit) |
| Horn, electric |
| Hydraulic lines for base functions |
| Lockout, hydraulic implement (for roading and servicing) |
| Moldboard |
| Mounting, cab roof accessories |
| Pump, hydraulic, high capacity |
| Radiator, cleanout access (both sides with swing doors) |
| Secondary steering |
| Serviceability, left side |
| (S·O·SSM) ports: engine, hydraulic, transmission, coolant, fuel |
| Tandem walkway/guards |
| Tool box |
| Standard and optional equipment may vary. Consult your Cat dealer for details. |
| Alternator, 280 ampere |
| Batteries, extreme duty, 1,400 CCA |
| Lights, high headlights |
| Lights, low headlights |
| Lights, working lights, basic |
| Lights, working lights, plus, LED |
| Lights warning, beacon or strobe |
| Lights, mounting for warning light |
| Articulation guard |
| Fenders, front |
| Fenders, rear |
| Front axle guard |
| Sound suppression (bottom) |
| Sound suppression (enclosure) |
| Transmission |
| Mirrors, outside heated 24V |
| Mirrors, outside mounted |
| Comfort plus arrangement |
| Comfort premium arrangement |
| All-wheel drive |
| Precleaner, snow |
| Starter, extreme duty, 1,000 amps |
| Transmission, autoshift |
| Attachment Ready Option (ARO) |
| Integrated cross slope |
| Accumulators, blade lift |
| Camera, rearview |
| Drain, ecology, engine Wiggins |
| Heater, engine coolant: 120V |
| Heater, engine coolant: 240V |
| Hydraulic arrangements with one or more additional hydraulic valves available for rear ripper, dozer, snow plow and snow wing |
| Snow wing mounting, frame ready |
| Starting aid, ether |
| Reversing fan, automatic or manual |
| Cat Grade with 3D |
| Blade extension, left, 610 mm (2 ft) |
| Blade extension, right hand, 610 mm (2 ft) |
| Counterweight |
| Cutting edges, curved |
| Endbits, overlay |
| Front lift group, mounting |
| Front lift group, mechanical |
| Grader bit, narrow and super penetration |
| Mid-mount scarifier, package |
| Moldboard: 4267 mm x 610 mm x 22 mm (14 ft x 24 in x 7/8 in) |
| Moldboard: 4267 mm x 686 mm x 25 mm (14 ft x 27 in x 1 in) |
| Moldboard: 4877 mm x 686 mm x 25 mm (16 ft x 27 in x 1 in) |
| Push plate |
| Ripper, rear |
| Ripper tooth |
| Scarifier, front |
| Snow arrangement |
| Snow wing ready package |
| Tow hitch |
