Longer description goes here
| Engine Model | Cat® C32B |
| Gross Power – SAE J1995:2014 | 1025 hp |
| Water Tank Capacity | up to 75 700 L (20,000 gal) |
| Engine Model | Cat® C32B |
| Gross Power – SAE J1995:2014 | 1025 hp |
| Engine Speed | 1800 r/min |
| Net Power – SAE J1349:2011 | 916 hp |
| Cylinders | 12 |
| Bore | 5.7 in |
| Stroke | 6.4 in |
| Displacement | 1959 in³ |
| Emissions (1) | Available as U.S. EPA Tier 4 Final/EU Stage V equivalent, Tier 3/Stage IIIA equivalent, or Tier 2/Stage II equivalent emission standards. |
| Emissions (2) | Meets China Nonroad Stage III emission standards equivalent to Tier 3 or Tier 2. |
| Note (2) | Power rating applies at 1,800 rpm when tested under the specified condition for the specified standard. |
| Note (1) | Net Power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler, and alternator with engine speed at 1,800 rpm. |
| Note (3) | Ratings based on SAE J1995 standard air conditions of 25° C (77° F) and 100 kPa (29.61 Hg) barometer. Power based on fuel having API gravity of 35 at 16° C (60° F) and an LHV of 42 780 kJ/kg (18,390 BTU/lb) when engine used at 30° C (86° F). |
| Note (4) | No engine derating required up to 2286 m (7,500 ft) for HRC and 4572 m (15,000 ft) for LRC machines. |
| Water Tank Capacity | up to 75 700 L (20,000 gal) |
| Note | Multiple tank configurations are offered based on customer preference and regional locations. Water Tank Capacity Range: 75 400 – 75 700 L (19,900 – 20,000 gal) |
| Machine Weight (with water tank full) | 327,964 – 327,964 lb / 147 172 – 148 762 kg |
| Empty Machine Operating Weight (without water / with fuel) | 160,307 – 162,323 lb / 72 714 – 73 629 kg |
| Water Tank – Max Empty Weight (no WDS) | 42,983 – 44,092 lb / 19 497 – 20 000 kg |
| Note (1) | Water tanks are offered by local 3rd party providers with customization based on water application and regional customer requirements. Hoist cylinder mounting on all tank offerings enhances serviceability. |
| Note (2) | Number of spray heads can be customized based on customer needs and preferred watering techniques. Option for 3 – 5 spray heads mounted on the back of the water tank. Additional option for spray heads on each side of the water tank. |
| Note (3) | Water cannon arrangement typically mounts to the front of the water tank. |
| Top Speed – Loaded | 41.7 mile/h |
| Note | Water Tank Capacity Range: 69 700 – 75 700 L (18,400 – 20,000 gal) |
| Note (2) | Operator selectable coverage: 0.2 – 0.8 L/m² (4 kph – 40 kph) / 0.5-0.2 gal/ft² (3 mph – 25 mph) |
| Target Gross Machine Weight | 363000 lb |
| Chassis Weight | 115217 lb |
| Brake Surface – Front | 6331 in² |
| Brake Surface – Rear | 15828 in² |
| Brake Standards | ISO 3450:2011 |
| Pump Flow – High Idle | 6331 gpm |
| Relief Valve Setting – Raise | 2750 psi |
| Relief Valve Setting – Lower | 500 psi |
| Body Raise Time – High Idle | 15 s |
| Body Lower Time – Float | 13 s |
| Body Lower Time – High Idle | 13 s |
| Empty Loaded Cylinder Stroke Front | 2.9 in |
| Empty Loaded Cylinder Stroke Rear | 2.5 in |
| Rear axle – Oscillation | 5.4 ° |
| Steering Standards | ISO 5010:2007 |
| Steer Angle | 30.5 ° |
| Turning Diameter – Front | 83 ft |
| Turning Circle – Clearance Diameter | 93 ft |
| Standard Tire | 27.00R49 (E4) |
| Note (1) | Productive capabilities of the 777 truck are such that, under certain job conditions, TKPH (TMPH) capabilities of standard or optional tires could be exceeded and, therefore, limit production. |
| Note (2) | Caterpillar recommends the customer evaluate all job conditions and consult the tire manufacturer for proper tire selection. |
| Fuel Tank (1) | 300 gal (US) |
| Fuel Tank (2) | 350 gal (US) |
| Cooling System | 63.4 gal (US) |
| Crankcase | 28.7 gal (US) |
| Differentials | 59.9 gal (US) |
| Final Drive – Each | 20 gal (US) |
| Steering System – Including Tank | 14.1 gal (US) |
| Brake Hoist System | 85 gal (US) |
| Torque Converter – Transmission System | 36.5 gal (US) |
| Air Conditioning | 18390 Btu/lb |
| Heater / Defroster | 43930 Btu |
| ROPS Standards (1) | Rollover Protective Structure (ROPS) for cab offered by Caterpillar meets ISO 3471:2008 ROPS criteria. |
| FOPS Standards | Falling Objects Protective Structure (FOPS) meets ISO 3449:2005 Level II FOPS criteria. |
| Note (1) | The operator Equivalent Sound Pressure Level (Leq) is 73 dB(A) when SAE J1166 FEB2008 is used to measure the value for an enclosed cab. This is a work cycle sound exposure level. The cab was properly installed and maintained. The test was conducted with t |
| Note (2) | The exterior sound pressure level for the standard machine measured at a distance of 15 m (49 ft) according to the test procedures specified in SAE J88:2008, mid-gear moving operation is 83 dB(A). |
| Note (3) | Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in a noisy environment. |
| Maximum water flow | 1800 gal(US)/min |
| Water per spray head (minimum) | 35 gal(US)/min |
| Water per spray head (maximum) | 600 gal(US)/min |
| Spray head opening range (minimum) | 0.04 in |
| Spray head opening range (maximum) | 0.75 in |
| Maximum size debris flushed through spray head | 0.75 in |
| Spray system hydraulic tank capacity | 7.25 gal (US) |
| Maximum number of rear spray heads | 5 |
| Minimum number of rear spray heads (recommended 3) | 2 |
| Minimum number of front/side spray heads | 2 |
| Maximum number of front/side spray heads | – |
| Maximum water from cannon (idle) | 600 gal(US)/min |
| Maximum water from cannon (high idle) | 1650 gal(US)/min |
| Maximum cannon spray distance | 200 ft |
| Type | Wet water pump/hydraulic motor coupling |
| Note | Operator selectable coverage: 0.2 – 0.8 L/m² (4 kph – 40 kph) / 0.05 – 0.2 gal/ft² (3 mph – 25 mph). Coverage rates above 0.6 L/m² may not be available at higher speeds depending on head count and configuration. |
| Note (1) | Spray head opening is automatically controlled by the system to achieve Auto Mode Coverage or manual mode flow rate. |
| Note (2) | The Auto Mode setting controls water coverage and automatically adjusts to the number of spray heads being used — independent of ground speed. This is an exclusive feature designed into the Cat WDS software to help water more efficiently. Water flow is co |
| Note (3) | Alternatively, manual mode allows the operator to set a water flow rate that is constant regardless of ground speed. This mode is not recommended for daily operation and will reduce watering efficiency and may increase fuel usage. |
| Note (4) | Spray heads on competitive water distribution systems require tools and maintenance to change flow and spray pattern. Caterpillar is the only company to have variable active spray heads to regulate water spray. |
| Note (5) | Cannon performance depends on nozzle orifice and pipe size. |
| Front Axle – Empty | 46 % |
| Front Axle – Loaded | 33 % |
| Rear Axle – Empty | 54 % |
| Rear Axle – Loaded | 67 % |
| Forward – 1 | 6.6 mile/h |
| Forward – 2 | 9.1 mile/h |
| Forward – 3 | 11.9 mile/h |
| Forward – 4 | 16.6 mile/h |
| Forward – 5 | 22.5 mile/h |
| Forward – 6 | 30.2 mile/h |
| Forward – 7 | 40.9 mile/h |
| Reverse | 7.5 mile/h |
| Note | Maximum travel speeds with standard 27.00R49 (E4) tires. |
| Differential Ratio | 2.736:1 |
| Planetary Ratio | 7.0:1 |
| Total Reduction Ratio | 19.1576:1 |
| Standard and optional equipment may vary. Consult your Cat dealer for details. |
| Autostall |
| Engine idle shutdown |
| Air-To-Air Aftercooler (ATAAC) |
| Air cleaner with precleaner (2) |
| Automatic cold mode idle control |
| Electric priming pump |
| Electric cold weather start (two starters and four batteries) |
| Ether starting aid |
| Exhaust, muffler |
| Fuel filter/water separator |
| Turbocharger (2) |
| Braking system:– Extended Life Brakes– Brake wear indicator– Automatic Retarder Control (ARC) (utilizes oil-cooled, multiple disc brakes)– Brake release motor (towing)– Manual retarder (utilizes oil-cooled, multiple disc brakes)– Oil-cooled, multiple disc (front/rear)– Parking– Secondary– Service |
| Transmission– Auto neutral idle– APECS Software– ECPC |
| Part Throttle Shifting– 7-speed automatic powershift with Torque Shift Management Electronic Clutch Pressure Control– Body up-shift inhibitor– Directional shift management– Downshift inhibitor– Neutral start switch– Neutral coast inhibitor– Reverse shift inhibitor– Reverse neutralizer during dumping– Programmable top gear selection |
| Suspension, rear |
| Alarm, backup |
| Alternator, 115 ampere |
| Auxiliary jump start receptacle |
| Batteries, maintenance-free, 12V (4), 190 amp-hour |
| Electrical system, 25 AMP, 24V to 12V converter |
| Lighting system– Backup light (halogen)– Directional signals/hazard warning, (front and rear LED)– Headlights, (halogen) with dimmer– Payload, indicator lights– Operator access courtesy lights– Side profile lights– Stop/tail lights (LED)– Service lights |
| Air conditioning |
| Ashtray and cigarette lighter |
| Coat hook |
| Cup holders (4) |
| Diagnostic connection port, 24V |
| Entertainment Radio Ready– 5 amp converter– Speakers– Antenna– Wiring harness |
| Gauges/indicators– Brake oil temperature gauge– Coolant temperature gauge– Hour meter– Tachometer– Engine overspeed indicator– Fuel level– Speedometer with odometer– Transmission gear indicator |
| Heater/defroster (11 070 kCal/43,930 BTU) |
| Auto temp control |
| Fluid level monitoring |
| Hoist lever |
| Horn, electric |
| Light – dome |
| Light – courtesy |
| Load counter, automatic |
| Advisor display |
| VIMS |
| TPMS |
| Foot rest |
| Mirrors – heated |
| Power port, 24V and 12V (2) |
| ROPS cab, insulated/sound suppressed |
| Cat Comfort Series III– Full air suspension– Retractable 3-point seat belt with shoulder harness |
| Steering wheel, padded, tilt and telescopic |
| Storage compartment |
| Sun visor |
| Throttle lock |
| Window, right side, hinged access/egress |
| Electric left side window control |
| Windshield wiper (intermittent) and washer |
| Tinted, laminated glass |
| Adaptive economy mode |
| Object detection (4 cameras, 4 radars) |
| Product Link™ Ready (Level 1) |
| TKPH/TMPH (Tons Kilometer Per Hour/ Tons Mile Per Hour) |
| Cat MineStar™: Level 1 – Basic (Equipment Tracking)* |
| *Basic connectivity package comes standard on all Cat Water Solutions trucks with a 6-month complimentary service-based offering |
| Engine crankcase |
| Driveline |
| Fan and A/C |
| Extended Life Coolant to –35° C (–30° F) |
| Body mounting group |
| Body safety pin (secures body in up position) |
| Body down indicator |
| CD-ROM parts book |
| Center-mounted rims |
| Fuel tank (1136 L/300 gal) |
| Ground level battery disconnect |
| Ground level engine shutdown |
| Ground level grease fittings |
| Reservoirs (separate)– Brake/hoist– Steering– Transmission/torque converter |
| Rims 19.5 × 49 |
| Rock ejectors |
| Supplemental steering (automatic) |
| Tie down eyes |
| Tow hooks (front)/Tow pin (rear) |
| Vandalism protection locks |
| Wiggins fast fuel |
| Traction Control System (TCS) (new version) |
| Attachment Zone |
| Controls: Factory installed and integrated into cab |
| Water System Monitor: integrated into cab, programmable spray configurations, automatic diagnostic messages |
| Variable Hydraulic Pump Drive: 6814 L/min (1,800 gal/min) at speeds of 4 kph to 40 kph (3 to 25 mph) with auto shut-off and soft startup |
| Stainless Steel Spray Heads: maintenance free, patented design resists corrosion |
| Independent Hydraulic Cooling System: minimizes overheating |
| Water Cannon: hydraulically controlled, integrated joystick with cab controls, optional nozzles |
| Parts & service available through global Cat dealer network |
| Standard and optional equipment may vary. Consult your Cat dealer for details. |
| Cab precleaner |
| Cat Engine Brake |
| Clustered grease fittings |
| Cold weather packages |
| Fluid fill service center |
| HID lights |
| Mirrors, convex |
| Mirrors, heated |
| Spare rim |
| Visibility package (meets ISO 5006 requirements) |
| Wheel chocks |
| Work Area Vision System (WAVS) |
| Cat MineStar™: Level 2 – Premium (Equipment Tracking + Production Recording) |
| Tanks are offered by local 3rd party providers with customization based on water application and regional customer requirements. Tie offs, ladders, splash guards, fill chute, rock ejectors, cannon selection, and additional options are available. Cat dealer or local tank manufacturer installation. Contact your local Cat dealer or Caterpillar OEM Solutions for recommendations on local tank providers and available options. |
