Contact Us

914 Small Wheel Loader

914

Small Wheel Loader

Price: Request a Quote for Pricing

The Cat® 914 Small Wheel Loader features an optimized Z-bar linkage that combines the digging efficiency of a traditional Z-bar loader with tool carrier capabilities for great performance and versatility. With parallel lift and high tilt forces throughout the working range you can safely and confidently handle loads with precise control.

Key Specs
Maximum Gross Power 110 hp
Operating Weight 19103 lb
Bucket Capacities 1.3-3.5 m3 (1.7-4.6 yd3)
Request a Quote Get Financing

Product Specifications for 914

Maximum Gross Power 110 hp
Rated Net Power – Rated Engine Speed 2200 r/min
Maximum Gross Power – Rated Engine Speed 1800 r/min
Rated Net Power – SAE J1349 99 hp
Maximum Gross Power – ISO 14396 (metric) 112 hp
Rated Net Power – ISO 9249 98 hp
Maximum Gross Torque – SAE J1995 335 ft·lbf
Maximum Gross Torque – ISO 14396 332 ft·lbf
Maximum Net Torque – SAE J1349 329 ft·lbf
Maximum Net Torque – ISO 9249 327 ft·lbf
Displacement 220 in³
Bore 3.85 in
Stroke 4.72 in
Engine Model Cat C3.6
Emissions Engine meets Tier 4 Final/Stage V emission standards.
Note Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
Maximum Gross Power – ISO 14396 110 hp
Operating Weight 19103 lb
Bucket Capacities 1.3-3.5 m3 (1.7-4.6 yd3)
Bucket Capacities – General Purpose 1.3-1.9 m³ (1.7-2.5 yd³)
Bucket Capacities – Light Material 2.5-3.5 m³ (3.3-4.6 yd³)
Recyclability 95%
ROPS ISO 3471:2008
FOPS ISO 3449:2005
Note (4) *The measurements were conducted with the cab doors and windows closed.
Note (2) The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).
Note (3) The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).
Note (1) Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Cooling System 5.7 gal (US)
Fuel Tank 43.6 gal (US)
Note DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Axles – Rear Center Differential 2 gal (US)
Hydraulic System – Including Tank 25.9 gal (US)
Diesel Exhaust Fluid (DEF) Tank 4.8 gal (US)
Engine Crankcase 2.6 gal (US)
Hydraulic Tank 14.5 gal (US)
Transmission 0.8 gal (US)
Axles – Front Center Differential 2 gal (US)
Maximum Flow – Steering Pump 22 gpm
Number of Steering Wheel Turns – Full Left to Full Right or Full Right to Full Left 3.75 turns
Steering Cycle Times – Full Left to Full Right – At 2,350 rpm: 90 rpm Steering Wheel Speed 2.8 s
Maximum Working Pressure – Steering Pump 3263 psi
Steering Articulation Angle – Each Direction 40 °
Relief Pressure – Tilt Cylinder – 3rd Function Maximum Working Pressure 3046 psi
Maximum Flow – Implement Pump 39 gpm
Maximum Flow – Implement Pump – 3rd Function, Maximum Flow, Standard 24 gpm
Relief Pressure – Tilt Cylinder – 4th Function Maximum Working Pressure 3046 psi
Hydraulic Cycle Time – Total Cycle Time 12.5 s
Hydraulic Cycle Time – Raise, Ground Level to Maximum Lift 5.2 s
Maximum Flow – Implement Pump – 4th Function, Maximum Flow 24 gpm
Hydraulic Cycle Time – Dump, at Maximum Reach 1.4 s
Relief Pressure – Tilt Cylinder 4931 psi
Maximum Flow – Implement Pump – 3rd Function, Maximum Flow, High 32 gpm
Maximum Working Pressure – Implement Pump 4061 psi
Hydraulic Cycle Time – Rackback 2.2 s
Hydraulic Cycle Time – Float Down, Maximum Lift to Ground Level 3.7 s
Note *Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.
Forward and Reverse – Speed Range 3 25 mile/h
Forward and Reverse – Speed Range 1* 6.3 mile/h
Forward and Reverse – Speed Range 2* 12.5 mile/h
Other Choices Include 17.5 R25 L3 XHA2; 17.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow; 17.5 R25 Solid
Note (1) Other tire choices are available. Contact your Cat dealer for details.
Standard Size 17.5 R25 L2 XTLA
Note (3) Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Note (2) In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.
Rear Oscillating ±11 degrees; Locking differential (Standard)
Front Fixed; Locking differential (standard)